Clean Banister Surface

What happens in this clip

Prepare a cleaning solution by pouring Lysol Multi-Surface Cleaner, specifically the 'Cool Adirondack Air' scent, into a bowl. Dip a clean cloth into the solution, wring out any excess liquid, and then wipe down the entire surface of the banister. Ensure to cover all accessible areas, including the top railing, sides, and any balusters if they are part of the cleaning area. The video shows the cleaner being applied to a cloth and then wiping down the white wooden banister. Note: While the user's prompt refers to static duster for dust removal, the video demonstrates a wet cleaning method for the banister itself. For light dust removal on banisters, a static duster (like the Swiffer Dusters Heavy Duty shown earlier in the video at 0:16-0:18 and used for high-up dusting at 0:31-0:34) can be effectively used to attract and trap dust without the need for liquid cleaners.

Goal: Thoroughly wipe down the banister railing using a multi-surface cleaner and a cloth to remove dirt, grime, and residual dust.

What's used

Tools

• Bowl
• Cleaning Cloth

Materials

• Lysol Multi-Surface Cleaner
• Cool Adirondack Air Lysol

About the full video

This video demonstrates a process of undecorating, cleaning, and dusting a home, including the removal of Christmas decorations from a banister and subsequently cleaning its surface. While the user's request specifies static duster use for banister dust removal, the video specifically shows the banister being cleaned with a cloth and liquid cleaner. However, a static duster is shown and used for general high-level dusting in other parts of the video, which could also be applied to banisters for dry dust removal.

Step 6 of 7: Clean Banister and Handrail

Using a clean cloth and an appropriate cleaner (e.g., wood polish, all-purpose cleaner, or disinfectant), wipe down the entire length of the banister and handrail. Ensure all dust, grime, and fingerprints are removed. For wood surfaces, a light polish can restore shine.

Open this step in the guide

Every video in How to Prep Stairs for Holiday Guests

1. Step 1: Clear Stairs

   • 1:17–1:46 Declutter Stairs
   • 1:29–1:47 Clear and Dry-Dust Staircases

2. Step 2: Vacuum Treads and Risers

   • 5:27–5:57 Vacuum Each Stair Step
   • 1:46–3:30 Vacuum the Stairs
   • 0:54–2:44 Vacuum the Staircase

3. Step 3: Spot Clean Stains

   • 0:50–1:24 Pre-treat Stains and Spots
   • 0:36–0:49 Spot Clean Stains and Targeted Areas
   • 1:49–1:58 Spot Treat Area Rug Stain

4. Step 4: Inspect for Loose or Damaged Components

   • 0:00–0:53 Assess Damage & Prepare for Repair
   • 1:02–1:35 Visually Inspect for Staircase Wear and Damage
   • 3:26–4:07 Prioritize Maintenance and Safety

5. Step 5: Tighten Loose Carpet or Treads

   • 3:58–4:31 Finish Edges and Remaining Treads
   • 0:00–0:05 Prepare the Loose Carpet Section
   • 0:38–0:49 Screw Through Carpeted Treads

6. Step 6: Clean Banister and Handrail

   • 5:58–6:12 Wipe Down Stair Banisters
   • 0:50–0:53 Clean Banister Surface (this video)
   • 3:40–4:10 Clean Handrails

7. Step 7: Add Festive Touches (Optional)

   • 1:05–3:17 Decorate Staircase with Garlands and Ribbon
   • 5:10–5:39 Decorate Staircase Railing
   • 0:05–0:07 Adorn Staircase with Garland and Stockings