Clean, Sand, and Tape the Staircase
From Stair Banister Refinishing · Step 1 of 5 · Video by Benjamin Moore Paints
Showing 0:32–1:08 of the source video. Watch the full video with every moment.
What happens in this clip
Thoroughly prepare the staircase area by first vacuuming any dust and debris from all surfaces. Next, use a damp cloth and warm soapy water to wipe down the stairs, handrails, and spindles. It's crucial to rinse all surfaces thoroughly to remove any soap film, as leftover residue will prevent paint from adhering properly. Allow the surfaces to dry completely. Place a drop cloth around the bottom of the staircase to protect your flooring. Then, use a fine grit sanding sponge to lightly sand and smooth any surfaces that will be painted. After sanding, vacuum and wipe away any sanding dust with a damp cloth. Finally, apply painters tape neatly along the wall border of your staircase and around the base of the spindles to create clean edges and protect adjacent surfaces from paint.
Goal: Prepare all surfaces for priming
What's used
Tools
- fine grit sanding sponge
- vacuum
Materials
- damp cloth
- drop cloth
- painters tape
- warm soapy water
About the full video
This DIY project provides step-by-step instructions on how to transform a tired staircase with a fresh paint job. It covers everything from preparing the surface, priming, and applying multiple coats of paint to different staircase components like treads, risers, handrails, and spindles. The project emphasizes proper cleaning, sanding, and taping techniques for a professional finish and highlights specific Benjamin Moore products recommended for durability.
Step 1 of 5: Clean the Banister
Using a degreaser and a sponge or cloth, scrub the banister from top to bottom. Pay special attention to any sticky spots or build-up. Rinse the banister with clean water and a damp cloth, then allow it to dry completely. This step is crucial for the adhesion of primer and finish.
Every video in Stair Banister Refinishing
Step 1: Clean the Banister
- 2:29–3:41 Prep Day: Cleaning and Sanding
- 0:32–1:08 Clean, Sand, and Tape the Staircase (this video)
- 0:39–1:04 Clean and Degloss
Step 2: Lightly Sand the Surface
- 0:56–1:55 Sand All Exposed Surfaces
- 0:11–0:35 Sanding the Banister
- 2:24–2:35 Lightly Sand the Surface
Step 3: Apply Bonding Primer (if painting)
- 3:45–4:11 Apply Primer
- 2:13–3:04 Apply Primer Coat
- 3:11–4:18 Apply Oil-Based Primer
Step 4: Apply Gel Stain or Paint
- 2:57–4:43 Apply First Coat of Gel Stain
- 3:03–3:39 Apply Gel Stain (Initial Pass)
- 0:24–2:30 Apply Gel Stain for Wood Grain Effect
Step 5: Apply Protective Topcoat
- 5:52–7:29 Apply Protective Top Coat
- 5:35–7:25 Apply Protective Topcoat and Smooth Finish
- 8:35–9:10 Apply Water-Based Topcoat
Questions about Stair Banister Refinishing
Is this banister refinishing project truly beginner-friendly, and can it really be completed in 4 days?
Yes, this project is designed for beginners as it avoids intensive stripping. The 4-day estimate is realistic, but it includes significant drying time between coats. Patience is key, as rushing can lead to poor adhesion or an uneven finish.
What safety precautions should I take when applying primers, paints, and stains indoors?
Always ensure good ventilation by opening windows or using fans to disperse fumes. Wear appropriate personal protective equipment like gloves and safety glasses. Use drop cloths to protect floors and furniture from spills and drips.
What are the most common mistakes beginners make when refinishing a banister this way, and how can I avoid them?
Common mistakes include insufficient cleaning and sanding, which compromises adhesion, and applying coats too thickly, leading to drips or poor drying. To avoid these, thoroughly clean and lightly scuff the surface, and always apply thin, even coats, allowing adequate drying time between each.
What's the main difference between using gel stain versus latex paint for this project, and how do I choose?
Gel stain allows the wood grain to show through, offering a richer, transparent finish, while latex paint provides an opaque, solid color. If painting, a bonding primer like Custom Building Products Multi-Surface Bonding Primer is crucial for adhesion. Your choice depends on whether you want to conceal or highlight the wood grain.
How critical are the cleaning and light sanding steps for a successful finish?
These preparatory steps are crucial for a lasting finish. The WD-40 Specialist Degreaser ensures all grime and oils are removed, while light sanding with a very fine 320-grit sponge creates a 'key' for the primer or gel stain to adhere properly. Skipping these steps will likely result in peeling or a splotchy finish over time.
Do I really need all the specific tools and materials listed, or are there alternatives?
The listed tools like Wooster angle sash brushes and Gator sanding sponges are recommended for quality and ease of application. While similar items can be substituted, ensure your bonding primer (if painting) and protective topcoat are high-quality for best durability and finish. Don't skimp on prep materials like tack cloths.
Can I skip the protective topcoat to save time, or is it truly necessary?
The protective topcoat, such as Modern Masters MasterClear, is highly recommended and should not be skipped. It provides essential durability, guards against scratches and daily wear, and significantly extends the life of your painted or stained finish, especially in a high-traffic area like a banister.
Stair Banister Refinishing
This project outlines how to paint or gel stain a stair banister without complete removal of the existing finish. It involves cleaning, light sanding, applying a bonding primer (if painting), then applying paint or gel stain, and finally, a protective topcoat. The process aims to refresh the banister's appearance while minimizing labor-intensive stripping.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.
Subscribe for exclusive updates
Be the first to know about promotions, new products, and sales.