Clean the Stairs
From How to Put Carpet Treads on Already-Carpeted Stairs · Step 1 of 6 · Video by Oak Valley Designs

Showing 0:34–0:40 of the source video. Watch the full video with every moment.
What happens in this clip
Before installing the stair treads, ensure the stairs are thoroughly clean. Use a vacuum cleaner to remove any dust, dirt, pet hair, or debris from the surface of each stair. A clean surface is crucial for the adhesive on the treads to bond properly.
Goal: Prepare the stair surface for tread installation.
What's used
Tools
- Vacuum Cleaner
- Broom and dustpan
About the full video
This project guides you through installing carpeted stair treads to enhance safety and prevent slips on hardwood stairs, particularly when there are young children or pets in the home. The process involves thorough cleaning of the stairs, precise measurement and marking for consistent tread placement, and secure application of the adhesive-backed treads.
Step 1 of 6: Clean Existing Carpet Surface
Using a vacuum cleaner with a brush attachment, meticulously clean each stair tread. Pay special attention to the edges and corners where dirt tends to accumulate. Ensure the entire surface area where the tread will be placed is free of any obstructions or loose fibers.
Every video in How to Put Carpet Treads on Already-Carpeted Stairs
Step 1: Clean Existing Carpet Surface
- 0:34–0:40 Clean the Stairs (this video)
- 0:09–0:45 Prepare and Clean Stair Treads
- 0:18–0:31 Clean the Stairs
Step 2: Measure and Mark Tread Placement
- 0:10–0:16 Measure and Mark Stair Tread Placement
- 0:00–0:11 Measure and Align First Stair Tread
- 0:12–0:57 Measure and Cut Carpet Tread
Step 3: Prepare Carpet Treads (If Necessary)
- 0:12–0:57 Measure and Cut Carpet Tread
- 2:09–3:19 Measure and Cut Carpet Pieces
- 0:37–0:59 Measure and Cut Carpet
Step 4: Apply Adhesive to Carpet Treads
- 0:05–0:06 Apply Adhesive to Treads
- 0:34–0:46 Apply Carpet Adhesive to Stairs
- 0:16–0:21 Apply Peel-and-Stick Carpet Treads
Step 5: Position and Press Carpet Treads
- 0:13–0:21 Position and Secure Tread
- 3:25–4:32 Secure Treads to Stairs
- 0:16–0:21 Apply Peel-and-Stick Carpet Treads
Step 6: Allow Adhesive to Cure
- 3:44–4:26 Final Curing and Caulking
- 3:06–3:19 Project Completion
How to Put Carpet Treads on Already-Carpeted Stairs
This project outlines the process of applying carpet treads to stairs that are already carpeted, enhancing safety and aesthetics. It involves preparing the existing carpet, cutting the treads to size, and securely attaching them. This covers the steps from initial measurement to final application.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

