Cut and Roll Carpet Strips
From How to Remove Carpet from a Stair Landing · Step 2 of 6 · Video by Todays Task

Showing 2:37–4:28 of the source video. Watch the full video with every moment.
What happens in this clip
To make carpet removal more manageable, especially for large rooms, cut the carpet into strips. Start at one side of the room and use a utility knife with a sharp blade to cut lines across the carpet. Apply significant pressure to ensure the blade cuts through both the carpet and the backing. Once a strip is cut, roll it up tightly. Rolling the carpet into smaller sections makes it easier to carry out of the house without damaging walls or struggling with heavy, bulky pieces. Always wear gloves to protect your hands from the rough carpet and potential sharp edges.
Goal: Break down large carpet sections into manageable rolls
What's used
Tools
- Utility Knife
- Work Gloves
About the full video
This video provides a practical guide on effectively removing old carpet and its underlying pad from a room. The process includes preparatory steps like removing doors and vents, cutting the carpet into manageable sections, rolling up the carpet and pad, and finally, addressing remaining staples and tack strips on the subfloor. The video emphasizes safe and efficient techniques for demolition, preparing the subfloor for new flooring installations.
Step 2 of 6: Score the Carpet Edges
Using a utility knife, carefully score the carpet along the base of the walls and where the carpet meets the stair risers. This helps to break the adhesive bond and makes it easier to pull the carpet up in manageable sections.
Every video in How to Remove Carpet from a Stair Landing
Step 1: Prepare the Stair Landing Area
- 0:00–0:58 Assess Existing Carpet and Secure Workspace
- 0:14–0:23 Initial Cleanup and Debris Removal
- 0:16–0:24 Clean and Prepare Staircase Substrate
Step 2: Score the Carpet Edges
- 0:33–0:43 Cut Carpet into Strips
- 2:37–4:28 Cut and Roll Carpet Strips (this video)
- 0:21–0:50 Remove the Carpet
Step 3: Remove Carpet and Padding
- 0:00–0:09 Remove Carpet and Padding
- 0:00–0:09 Remove Carpet and Pad
- 0:01–0:40 Remove Carpet and Padding
Step 4: Remove Staples and Tack Strips
- 0:55–1:00 Remove Tack Strips
- 1:15–2:15 Remove Staples and Tack Strips
- 3:04–4:13 Remove Tack Strips and Staples
Step 5: Clean the Subfloor
- 0:12–0:14 Clean the Subfloor
- 0:13–0:14 Clean the Subfloor
- 0:18–0:23 Clean the Subfloor
Step 6: Dispose of Old Carpet and Padding
- 0:31–0:38 Remove Carpet Padding
- 3:40–4:43 Dispose of Old Carpet and Padding
- 0:54–1:02 Remove Carpet Pad
How to Remove Carpet from a Stair Landing
This project outlines the steps for removing carpet from a stair landing, including preparation, removal of carpet and padding, and clean-up.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

