Identify Squeak Points and Mark Drilling Guides
From How to Fix Squeaky Hardwood Stairs from Above · Step 1 of 6 · Video by Fix it with Fowler

Showing 2:46–5:26 of the source video. Watch the full video with every moment.
What happens in this clip
Examine the exposed wooden treads and risers. Squeaks typically occur where the tread meets the riser, often because the original wooden blocks or pins supporting them have loosened over time due to wood drying out. To secure these, you'll need to drill and screw through the tread into the riser. To ensure consistent placement of screws, use an adjustable set square to find the precise measurement from the back edge of the tread to the rebated slot where the riser sits. Mark this distance on each tread. Then, using a piece of wood or a straight edge, draw a straight line across the tread, equidistant from the riser below. This line will guide the placement of the screws. The host suggests five fixings per tread, spaced equally, allowing for the wood to be pushed up to one edge of the stringer.
Goal: Precisely mark the treads for future drilling to secure risers and eliminate movement
What's used
Tools
- Adjustable Set Square
- Pencil
- Straight Edge (piece of wood)
About the full video
This video provides a detailed guide on how to eliminate squeaks and creaks from a wooden staircase by reinforcing the treads and risers. The process involves carefully removing existing carpet and gripper rods, marking and preparing the stairs for reinforcement, applying wood glue, securing the treads and risers with screws, and then reinstalling the carpet underlay and carpet.
Step 1 of 6: Locate Squeak Source
The first and most crucial step in repairing squeaky hardwood stairs is to accurately identify the source of the noise. This often involves subtle movements and vibrations in the stair components. By carefully walking each step, paying close attention to where the sound originates, you can narrow down the possibilities. Sometimes, having another person walk the stairs can help you focus on the specific step or area that is moving and producing the squeak. This process might require repeating the walk a few times, perhaps with slight variations in weight distribution, to be absolutely certain of the location.
Every video in How to Fix Squeaky Hardwood Stairs from Above
Step 1: Locate Squeak Source
- 0:00–1:23 Identify Squeak Source
- 2:46–5:26 Identify Squeak Points and Mark Drilling Guides (this video)
- 0:44–1:08 Identify Squeak and Gather Materials for PVA Method
Step 2: Access from Above
- 0:14–0:34 Fix Squeaks from Underneath with Shims
- 0:03–1:05 Identify and Prepare Problem Area
- 0:56–1:24 Apply Screws or Blocks for Stability
Step 3: Secure Loose Tread/Riser
- 6:29–7:31 Drive Screws to Secure Tread to Riser
- 6:13–6:27 Secure Front Treads with Screws
- 2:05–4:08 Reinforce Risers and Treads with Adhesive and Timber
Step 4: Address Loose Stringers
- 0:09–0:13 Secure Lower Stringer Section
- 0:56–1:24 Apply Screws or Blocks for Stability
- 1:24–2:44 Fix Squeaks on Carpeted Stairs
Step 5: Test for Squeaks
- 4:28–5:00 Test the Repaired Stairs
- 0:46–0:52 Fix Squeaks on Hardwood Stairs with Screws and Putty
- 11:15–11:37 Final Inspection
Step 6: Conceal Screw Heads (Optional)
- 1:12–1:17 Conceal Screw Holes
- 0:22–0:30 Fill Screw Holes with Wood Putty
- 4:26–4:39 Conceal Screw Heads
How to Fix Squeaky Hardwood Stairs from Above
Address squeaky hardwood stairs from above by identifying and securing the source of the noise, which typically involves loose treads, risers, or stringers.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

