Install Remaining Treads

What happens in this clip

With the first tread securely in place, proceed to install the remaining carpet stair treads. Follow the same procedure as the first tread for each subsequent step. Carefully position each tread, ensuring consistent spacing and alignment with the previously installed treads. Press down firmly across the entire surface of each tread to ensure it adheres properly. The video shows the rapid progression of installing multiple treads, highlighting the ease of the process. Pay close attention to maintaining a uniform appearance across all steps. Take your time to ensure each tread is perfectly aligned before pressing it down firmly.

Goal: Install all carpet stair treads on the staircase.

What's used

Tools

• Hands
• J-Roller or Seam Roller
• Heavy book wrapped in cloth

Materials

• Oak Valley Designs Carpet Stair Treads Oak Valley Designs

About the full video

This DIY project demonstrates the straightforward process of installing carpet stair treads on a wooden staircase using pre-manufactured treads. The project aims to enhance safety, reduce noise, and improve the aesthetic appeal of stairs. The process involves unboxing the treads, preparing the staircase, carefully placing and aligning each tread, and securing them to achieve a professional and finished look.

Step 7 of 8: Repeat for Remaining Treads

Systematically repeat Steps 1 through 6 for each subsequent stair tread. Ensure consistent alignment and pressure application on each step. Work your way up the spiral staircase, maintaining the same level of care and precision for each tread installation.

Open this step in the guide

Every video in How to Install Carpet Treads on a Spiral Staircase

1. Step 1: Measure and Mark Tread Placement

   • 0:10–0:16 Measure and Mark Stair Tread Placement
   • 0:00–0:11 Measure and Align First Stair Tread
   • 0:05–0:18 Measure Each Stair Individually

2. Step 2: Clean Stair Treads

   • 0:09–0:45 Prepare and Clean Stair Treads
   • 0:34–0:40 Clean the Stairs
   • 0:36–0:41 Clean and Smooth Stairs

3. Step 3: Position and Align First Tread

   • 3:25–4:32 Secure Treads to Stairs
   • 0:00–0:11 Measure and Align First Stair Tread
   • 0:10–0:18 Place and Secure First Tread

4. Step 4: Apply Adhesive (if required)

   • 0:05–0:06 Apply Adhesive to Treads
   • 0:34–0:46 Apply Carpet Adhesive to Stairs

5. Step 5: Press Carpet Tread into Place

   • 0:04–0:06 Install Carpet Treads
   • 0:59–2:07 Install First Stair Tread
   • 0:21–0:26 Press Down Firmly

6. Step 6: Secure Edges (if applicable)

   • 1:19–1:59 Lay and Secure Carpet Sections (Repetitive)
   • 0:30–1:07 Secure Carpet with Staples
   • 7:38–8:56 Install Final Riser and Top Landing

7. Step 7: Repeat for Remaining Treads

   • 0:18–0:24 Install Remaining Treads (this video)
   • 0:13–0:21 Install Remaining Treads
   • 1:01–1:15 Install Remaining Stair Treads

8. Step 8: Inspect and Clean Up

   • 0:02 Final Touches and Inspection
   • 0:31–0:38 Inspect and Finish Installation
   • 0:13–0:17 Complete Installation and Final Inspection