Measure Stair Tread Depth
From how to measure bullnose stairs for carpet stair treads · Step 2 of 3 · Video by Oak Valley Designs
Showing 0:54–1:39 of the source video.
What happens in this clip
Measure the full depth of your stair tread, from the back of the tread to the front edge (bullnose). For instance, if the measurement is 11 and 1/4 inches. It is crucial not to order this exact depth. Instead, subtract a small amount, typically 1/4 inch to 1/2 inch, from the total depth. This slight reduction ensures that the carpet stair tread sits tightly against the bullnose without hanging over, which is important for both aesthetics and safety. For example, subtracting 1/4 inch from 11 and 1/4 inches results in an 11-inch depth for your carpet tread.
Goal: Measure the full depth of the stair tread and then subtract a small amount (1/4 to 1/2 inch) to ensure a snug fit that prevents the carpet from overhanging the bullnose.
What's used
Tools
- Tape Measure
About the full video
This video provides detailed instructions on how to accurately measure stair treads for custom carpet installations. It covers measuring both the width and depth of each tread, offering guidance on how to adjust these measurements to achieve the desired aesthetic of exposed wood. A helpful tip for visualizing the final fit using painter's tape is also included to ensure satisfaction before ordering.
What's said in this clip
That's going to be your depth. Your depth is going to be all right. This measures 11 and 1/4. Okay, we're not going to order 11 and 1/4. We're going to subtract a/4 in and we're going to order an 11. So that'll give us a little space in the back, which is perfect. And what you want so that the carpet stair tread is really tight on this front bullnness. You do not want that to hang over. And that's really important. You could also say, well, I can either subtract a/4 in or a/ in would also be fine. It doesn't have to be an absolute perfect science. You just want a little space in the back. So, anywhere from a/4 in to a/ inch is perfect. And that's it. So, I would do a 35 by 11 and that would be great.
Automatically transcribed from the source video.
Step 2 of 3: Confirm Overhang and Determine Ideal Tread Width for Safety and Style
It's time to confirm those critical dimensions for both safety and the perfect aesthetic. Double-check that the nosing overhang you just measured is comfortably within our recommended ¾-inch to 1¼-inch range. Additionally, ensure the rounded radius of your bullnose step doesn't exceed ½ inch. These specifications are vital for the secure and beautiful application of your Oak Valley Designs treads. To achieve that truly integrated, professional finish – the kind that looks like it was always meant to be there – you'll want your carpet treads to extend across the entire width of your step.
Other videos for this step
how to measure bullnose stairs for carpet stair treads
Bullnose stairs add a touch of elegance, but their unique rounded edge can make finding the right carpet treads feel tricky. Don't worry, we're here to help! This expert guide from Oak Valley Designs empowers you to accurately measure your bullnose steps, ensuring your new carpet stair treads wrap beautifully and securely. We'll show you how to account for that distinctive rounded lip, guaranteeing a perfect, non-slip fit that enhances both the safety and style of your home – a better way to tread, indeed!
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.