Measure Stair Tread Depth
From how to measure your stairs for a carpet runner · Step 2 of 4 · Video by Oak Valley Designs
Showing 0:54–1:39 of the source video.
What happens in this clip
Measure the full depth of your stair tread, from the back of the tread to the front edge (bullnose). For instance, if the measurement is 11 and 1/4 inches. It is crucial not to order this exact depth. Instead, subtract a small amount, typically 1/4 inch to 1/2 inch, from the total depth. This slight reduction ensures that the carpet stair tread sits tightly against the bullnose without hanging over, which is important for both aesthetics and safety. For example, subtracting 1/4 inch from 11 and 1/4 inches results in an 11-inch depth for your carpet tread.
Goal: Measure the full depth of the stair tread and then subtract a small amount (1/4 to 1/2 inch) to ensure a snug fit that prevents the carpet from overhanging the bullnose.
What's used
Tools
- Tape Measure
About the full video
This video provides detailed instructions on how to accurately measure stair treads for custom carpet installations. It covers measuring both the width and depth of each tread, offering guidance on how to adjust these measurements to achieve the desired aesthetic of exposed wood. A helpful tip for visualizing the final fit using painter's tape is also included to ensure satisfaction before ordering.
What's said in this clip
That's going to be your depth. Your depth is going to be all right. This measures 11 and 1/4. Okay, we're not going to order 11 and 1/4. We're going to subtract a/4 in and we're going to order an 11. So that'll give us a little space in the back, which is perfect. And what you want so that the carpet stair tread is really tight on this front bullnness. You do not want that to hang over. And that's really important. You could also say, well, I can either subtract a/4 in or a/ in would also be fine. It doesn't have to be an absolute perfect science. You just want a little space in the back. So, anywhere from a/4 in to a/ inch is perfect. And that's it. So, I would do a 35 by 11 and that would be great.
Automatically transcribed from the source video.
Step 2 of 4: Precision Depth: Measuring Each Tread from Back to Nosing
Now for the crucial part: measuring the depth of each individual tread. Start by positioning your rigid tape measure snugly against the vertical riser at the very back of the step. Then, extend that tape measure all the way over the front rounded edge – that's what we call the 'nosing.' For truly precise results, it’s absolutely crucial to keep your tape measure flat and perfectly level across the entire tread. A vital safety and quality tip: *never* measure over any existing flooring, old carpet, or adhesive residue. These can throw off your measurements and compromise the perfect fit you're aiming for. Once measured, carefully record the depth for each step. This attention to detail is what makes The Oak Valley Difference!
Other videos for this step
how to measure your stairs for a carpet runner
Ready to transform your staircase with beautiful, custom-fit carpet treads? This empowering DIY guide will walk you through each step of accurately measuring every individual tread on your straight staircase. We'll show you why measuring each step separately is key – especially in older homes – to guarantee a flawless, custom fit that brings safety, style, and peace of mind to your home. Get ready for a better way to tread!
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.