Tighten Existing Fasteners
From Newel Post and Banister Tightening · Step 5 of 8 · Video by The Honest Carpenter
Showing 2:00–2:24 of the source video.
What happens in this clip
Before installing new hardware, tighten any existing fasteners on the railing posts. Deck lumber can shrink over time, causing fasteners to loosen. Use a ratchet wrench with an appropriate socket to tighten existing lag bolts. For this task, a larger half-inch ratchet wrench is recommended due to the force required to adequately tighten these fasteners.
Goal: Ensure all existing lag bolts are tightly secured.
What's used
Tools
- Ratchet Wrench Craftsman
- Adjustable wrench (less efficient)
- Socket Set Craftsman
About the full video
This DIY project provides step-by-step instructions on how to firm up wobbly deck or porch railings by adding beefier hardware, specifically lag bolts. It covers identifying the problem, selecting appropriate fasteners, pre-drilling holes to prevent wood splitting, and installing the new hardware for both flat and corner posts. The project focuses on improving security rather than achieving modern code compliance, which often requires more extensive rebuilding.
Step 5 of 8: Check and Tighten Banister/Handrail Connections
Examine where the banister and handrail connect to the newel posts and any wall-mounted brackets. Look for screws or bolts that may have loosened over time. Tighten these fasteners as needed, ensuring a snug fit without overtightening.
Other videos for this step
Newel Post and Banister Tightening
This project involves identifying the cause of a wobbly newel post and loose banister and then applying appropriate methods to secure them. This may include tightening screws, reinforcing connections, or using wood shims and adhesive.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.
Subscribe for exclusive updates
Be the first to know about promotions, new products, and sales.