How to build freestanding porch / steps / deck HOME DEPOT DIY
Video by C.L.S. ALL-IN-ONE · 1 moment used in Oak Valley Designs's DIY guides · 14:12 long

Moments in this video
- 5:20–6:48 Prepare Base and Install Stair Stringers
From Deck Stairs, Step 1: Prepare the Stair Location
Before installing the pre-made stair stringers, it's essential to prepare a solid, non-dirt base to prevent direct contact with the ground, which can lead to rot and instability. Dig out a shallow trench in the dirt where the bottom of the stairs will rest. Lay concrete pavers in this trench, ensuring they are level and at the correct height to support the stair stringers. Once the pavers are level, the pre-made stair stringers (purchased from a home improvement store) can be positioned on top of them. The presenter uses three stringers: one in the middle and one on each end. These stringers are toenailed into the top deck frame using screws, driving them at an angle to secure them.
The guide that use this video
More from the Oak Valley Designs DIY Hub
Read the guide Browse all guides
Planning this project? Shop Oak Valley Designs.

