How To Replace Balusters - Without Removing Handrail

Moments in this video

1. 6:47–8:49 Glue and Install the First Baluster From Newel Post and Banister Tightening, Step 7: Secure Loose Banister Balusters

   After the baluster has been accurately trimmed to size (the cutting process is not shown in this segment), apply a generous amount of wood glue, specifically Titebond Premium Wood Glue, around the removable locator pin at the bottom of the baluster. Carefully insert the glued pin into the prepared, recessed hole on the stair tread. To attach the top of the baluster, gently lift the handrail upwards just enough to create space. Then, guide the tapered top end of the baluster into its corresponding hole in the handrail. Once both the bottom pin and the top are seated, twist the baluster slightly to ensure the glue spreads evenly. Immediately wipe away any excess glue that oozes out with a damp rag for a clean finish. The goal is for the baluster to fit snugly and securely without the need for additional caulk.

2. 6:47–8:49 Glue and Install the First Baluster From Stair Baluster Repair, Step 4: Install New Baluster

   After the baluster has been accurately trimmed to size (the cutting process is not shown in this segment), apply a generous amount of wood glue, specifically Titebond Premium Wood Glue, around the removable locator pin at the bottom of the baluster. Carefully insert the glued pin into the prepared, recessed hole on the stair tread. To attach the top of the baluster, gently lift the handrail upwards just enough to create space. Then, guide the tapered top end of the baluster into its corresponding hole in the handrail. Once both the bottom pin and the top are seated, twist the baluster slightly to ensure the glue spreads evenly. Immediately wipe away any excess glue that oozes out with a damp rag for a clean finish. The goal is for the baluster to fit snugly and securely without the need for additional caulk.

3. 8:50–9:34 Complete Baluster Installation From Stair Baluster Repair, Step 4: Install New Baluster

   Continue the installation process for all remaining balusters, following the same steps. Each baluster should be measured and trimmed individually to ensure a perfect fit between the stair tread and the handrail. Apply Titebond Premium Wood Glue to the removable locator pin at the base of each baluster. Insert the pin into its corresponding prepared hole on the stair tread. Lift the handrail slightly to insert the tapered top of the baluster into the handrail's hole, then twist gently to set the glue. Immediately clean any excess glue with a wet rag to maintain a neat appearance. Once all balusters are installed, the staircase will have a refreshed and stable railing system.

Guides that use this video

• Newel Post and Banister Tightening
• Stair Baluster Repair