Wall Mounted Handrail Install for Beginners!

Moments in this video

1. 2:22–2:54 Mark Screw Locations From Stair Handrail Installation, Step 3: Position and Mark Bracket Locations

   Carefully hold the pre-assembled handrail against the wall at the previously marked desired height. Align it so that the mounting flanges are positioned over the green tape marks (studs) where possible. Use a pencil to precisely trace the screw holes within each flange onto the wall. The presenter suggests starting by holding one of the middle sections in place first, as this can help stabilize the rail while you mark the ends, making it easier to ensure proper alignment. This step identifies the exact points where you will need to drill or install anchors.

2. 2:54–3:13 Prepare Wall for Mounting From Gallery Wall, Step 6: Install Hanging Hardware

   Based on your marked locations from the previous step, prepare the wall for mounting. For any screw locations that are not over a stud (i.e., in drywall sections), install self-drilling drywall toggle anchors using a cordless drill. These anchors are designed to provide a strong hold in drywall where no stud is present. For screw locations that are directly over a stud, use a cordless drill with an appropriate drill bit to pre-drill pilot holes. Pre-drilling prevents the wood stud from splitting when the screws are driven in.

Guides that use this video

• Stair Handrail Installation
• Gallery Wall