Align Carpet Landing with Treads
From how to measure an L-shaped staircase for carpet stair treads · Step 1 of 3 · Video by Oak Valley Designs
Showing 0:10–0:42 of the source video.
What happens in this clip
Begin by roughly placing the carpet landing piece in its designated area. The critical first step is to carefully line up the front edge of the carpet landing with the previously installed carpet stair treads. The landing carpet comes with a pre-molded bullnose edge; ensure this edge is correctly wrapped over the front of the landing, creating a tight and seamless transition with the stairs below.
Goal: Position the carpet landing piece, ensuring its front edge aligns perfectly with the existing stair treads and the pre-molded bullnose wraps tightly over the landing's edge.
About the full video
This video demonstrates the final steps in installing a carpet landing piece at the top of a carpeted staircase. It focuses on properly aligning the landing carpet with existing stair treads, securing the bullnose edge, and smoothing out the carpet to ensure a neat and safe finish.
What's said in this clip
Okay. So, now we have measured for the landing. We have installed our treads. And now we're going to install our landing. And I have already unboxed it and just kind of roughed it in here. And some key points that you need to know. Just line up this edge to your carpet stair treads. Okay? and do the same thing behind me over here with this edge. Make sure I'll lift this up and show you. This is the bullnose edge that's premolded. Just wrap it over the front and make sure that it's on there nice and tight.
Automatically transcribed from the source video.
Step 1 of 3: Uncover Your Staircase's Unique Turn: Landing or Winder Steps?
Take a moment to closely look at the 90-degree turn that elegantly connects the two straight sections of your L-shaped staircase. Is it a generous, flat platform – what we call a landing – perfect for a moment's pause? Or does it feature a series of beautifully angled, wedge-shaped steps, known as winder steps, that guide you smoothly around the corner? This initial identification is absolutely key because it completely transforms how you'll approach measuring that corner. For a landing, you'll treat it as a single, separate rectangular piece, ready for a custom tread. For winder steps, each unique, tapered step will require its own individual measurement, ensuring a truly custom, safe, and stylish fit. This attention to detail is part of The Oak Valley Difference, ensuring your DIY stair remodel is a success.
Other videos for this step
how to measure an L-shaped staircase for carpet stair treads
An L-shaped staircase, often called a quarter-turn, brings unique architectural charm to your home. But when it comes to adding the safety and style of carpet stair treads, its 90-degree turn can seem a little tricky to measure. Don't worry, we're here to empower your DIY journey! The secret to a perfect, custom fit for your Oak Valley Designs treads is to see your L-shaped staircase as three distinct areas: the first straight flight, the turning section, and the second straight flight. The way you approach the turn—whether it's a spacious landing or elegant winder steps—will guide your measuring strategy. For straight sections, you'll precisely measure each tread's width and depth. For a landing, it's one simple, larger measurement. For winder steps, each unique, tapered step gets its own careful attention. And here’s a pro tip for peace of mind: always measure from the *tread edge to tread edge*, never wall to wall. This ensures your custom treads fit beautifully, even if your walls aren't perfectly square, delivering the safety and elegance your family deserves.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.