Allow Curing & Access Product Information

What happens in this clip

After the application is complete, allow the epoxy coating to cure fully. It is important to understand that the cure times for Ultra Grip will vary significantly depending on external factors such as the ambient temperature, the specific temperature of the surface, and the type of substrate the coating was applied to. SlipDoctors Ultra Grip is available in a variety of colors and offers different hardener options to meet specific aesthetic and performance requirements. For comprehensive technical specifications, detailed application instructions, and safety information, it is recommended to scan the provided QR code to download the Technical Data Sheet. Once fully cured, your new anti-slip surface by SlipDoctors will be ready for use.

Goal: Ensure the epoxy coating fully cures and access additional product and safety details.

What's used

Tools

• QR Code Reader (Smartphone/Tablet)

About the full video

This project provides step-by-step instructions for applying SlipDoctors Ultra Grip, a two-component heavy-duty anti-slip epoxy coating. The process involves ensuring safety, thoroughly mixing the epoxy components, and then applying the coating to a floor surface using a roller or squeegee to achieve enhanced durability, chemical resistance, and safety in areas like garages, warehouses, or marine environments.

Step 4 of 4: Allow Treatment to Cure

Once the anti-slip treatment has been applied, it needs time to cure and achieve its full strength and non-slip properties. This curing time can vary significantly depending on the product used, ranging from a few hours to several days. Avoid walking on the stairs, especially in socks, during this critical period to ensure the treatment adheres properly and develops its intended durability.

Open this step in the guide

Every video in How to Stop Slipping on Hardwood Stairs in Socks

1. Step 1: Clean the Stair Treads

   • 0:34–0:40 Clean the Stairs
   • 0:04–0:07 Clean the Staircase
   • 0:18–0:31 Clean the Stairs

2. Step 2: Sand the Stair Treads (Optional)

   • 0:46–0:59 Spray Clear Anti-Slip Coating

3. Step 3: Apply Anti-Slip Treatment

   • 0:02–0:06 Apply Anti-Slip Strip
   • 0:46–0:59 Spray Clear Anti-Slip Coating
   • 1:07–1:32 Initial Tread Application

4. Step 4: Allow Treatment to Cure

   • 0:24–0:30 Allow for Curing
   • 1:07–1:26 Allow Curing & Access Product Information (this video)
   • 0:39–0:46 Allow Tuff Grip to Dry and Cure