Allow Tuff Grip to Dry and Cure

What happens in this clip

After applying the Tuff Grip coating, allow it to dry for the recommended time of four to six hours. During this period, avoid walking on or placing objects on the newly coated surface to ensure proper curing and durability. Once dry, the surface will be ready to enjoy its lasting anti-slip properties.

Goal: Allow the coating to fully dry and cure for maximum durability

About the full video

This DIY project demonstrates how to apply Tuff Grip high-performance anti-slip coating to various indoor and outdoor surfaces. The process involves thorough surface preparation, careful application of the textured coating using a paint roller, and a drying period to achieve a durable, slip-resistant finish.

Step 4 of 4: Allow Treatment to Cure

Once the anti-slip treatment has been applied, it needs time to cure and achieve its full strength and non-slip properties. This curing time can vary significantly depending on the product used, ranging from a few hours to several days. Avoid walking on the stairs, especially in socks, during this critical period to ensure the treatment adheres properly and develops its intended durability.

Open this step in the guide

Every video in How to Stop Slipping on Hardwood Stairs in Socks

1. Step 1: Clean the Stair Treads

   • 0:34–0:40 Clean the Stairs
   • 0:04–0:07 Clean the Staircase
   • 0:18–0:31 Clean the Stairs

2. Step 2: Sand the Stair Treads (Optional)

   • 0:46–0:59 Spray Clear Anti-Slip Coating

3. Step 3: Apply Anti-Slip Treatment

   • 0:02–0:06 Apply Anti-Slip Strip
   • 0:46–0:59 Spray Clear Anti-Slip Coating
   • 1:07–1:32 Initial Tread Application

4. Step 4: Allow Treatment to Cure

   • 0:24–0:30 Allow for Curing
   • 1:07–1:26 Allow Curing & Access Product Information
   • 0:39–0:46 Allow Tuff Grip to Dry and Cure (this video)