Apply Anti-Slip Strip

What happens in this clip

Carefully peel back a section of the protective backing from one end of a pre-cut anti-slip strip. Align the exposed adhesive side of the strip along the edge of the stair, ensuring it is straight and centered. Slowly press the exposed part of the strip onto the stair, working from one end to the other, while gradually peeling off the rest of the backing. Once the entire strip is in place, firmly press down along its entire length with your hands to ensure good adhesion and to remove any trapped air bubbles.

Goal: Secure the anti-slip strip firmly to the stair edge

What's used

Tools

• Hands
• Squeegee

Materials

• Anti-slip staircase guard strip

About the full video

This project demonstrates the simple process of installing anti-slip "staircase guards" to prevent slips and falls on stairs. It involves preparing the stair surface, applying self-adhesive strips to the edge of each step, and trimming them to fit, significantly enhancing stair safety.

Step 3 of 5: Install Peel-and-Stick Floor Protection

Measure and cut peel-and-stick vinyl tiles or protective sheets to fit each stair tread and the entry floor area. Carefully peel off the backing and apply the material smoothly, ensuring good adhesion and no air bubbles. Overlap edges slightly on stairs if using multiple pieces to create a continuous barrier. Trim any excess material for a clean finish.

Open this step in the guide

Every video in How to Protect Stairs and Entry Floors from Winter Salt and Slush

1. Step 1: Clean Entryway and Stairs

   • 0:30–2:29 Clean the Entryway Floor
   • 3:48–4:50 Sweep Stairs and Entryway
   • 0:25–0:39 Mop Entryway and Hallway Floors

2. Step 2: Apply Temporary Mats or Runners

   • 0:04–0:09 Place Footmats at Entrances
   • 0:09–0:16 Install Footmats in High-Traffic Areas
   • 7:27–8:00 Strategically Place Entryway Rugs and Mats

3. Step 3: Install Peel-and-Stick Floor Protection

   • 0:09–0:15 Install New Stair Treads
   • 1:09–2:26 Install First Rounded Stair Tread
   • 0:02–0:06 Apply Anti-Slip Strip (this video)

4. Step 4: Apply a Protective Coating or Sealant

   • 1:13–1:15 Apply Protective Sealer
   • 8:31–9:28 Applying Water-Based Sealer and Acrylic Floor Finish
   • 1:11–1:14 Apply Protective Sealer

5. Step 5: Maintain Protective Measures

   • 1:55–2:11 Establish a Mat Maintenance Routine
   • 1:40–1:55 Deploy and Secure Floor Safety Mats
   • 0:58–1:29 Vacuum Loose Debris