Mop Entryway and Hallway Floors

What happens in this clip

After refreshing the mop head by wetting and wringing it in the solution, proceed to mop the entryway and hallway floors. These areas are typically high-traffic zones and can accumulate significant amounts of outdoor dirt, dust, and pet dander from foot traffic and pets. Use long, overlapping strokes to cover the entire floor surface, ensuring the hypoallergenic solution works to lift and trap allergens effectively. Pay special attention to corners and edges along baseboards and near the front door where debris often collects.

Goal: Continue mopping from the kitchen into the entryway and hallway, focusing on paths where outdoor contaminants and pet dander are frequently tracked in.

What's used

Tools

• Spin Mop with Hypoallergenic Solution

About the full video

This video demonstrates a routine floor mopping process using a hypoallergenic cleaning solution, aimed at reducing household allergens like dust mites and pet dander to improve indoor air quality. It covers preparing the mop bucket with solution, mopping various tiled floor areas, and properly disposing of the dirty water.

Step 1 of 5: Clean Entryway and Stairs

Sweep or vacuum the entry floor and stairs to remove loose dirt and debris. Then, use a damp mop or cloth with a mild cleaning solution to wipe down all surfaces. Ensure the area is completely dry before proceeding to the next step. For stubborn salt residue, a solution of equal parts white vinegar and water can be effective, followed by a clean water rinse.

Open this step in the guide

Every video in How to Protect Stairs and Entry Floors from Winter Salt and Slush

1. Step 1: Clean Entryway and Stairs

   • 0:30–2:29 Clean the Entryway Floor
   • 3:48–4:50 Sweep Stairs and Entryway
   • 0:25–0:39 Mop Entryway and Hallway Floors (this video)

2. Step 2: Apply Temporary Mats or Runners

   • 0:04–0:09 Place Footmats at Entrances
   • 0:09–0:16 Install Footmats in High-Traffic Areas
   • 7:27–8:00 Strategically Place Entryway Rugs and Mats

3. Step 3: Install Peel-and-Stick Floor Protection

   • 0:09–0:15 Install New Stair Treads
   • 1:09–2:26 Install First Rounded Stair Tread
   • 0:02–0:06 Apply Anti-Slip Strip

4. Step 4: Apply a Protective Coating or Sealant

   • 1:13–1:15 Apply Protective Sealer
   • 8:31–9:28 Applying Water-Based Sealer and Acrylic Floor Finish
   • 1:11–1:14 Apply Protective Sealer

5. Step 5: Maintain Protective Measures

   • 1:55–2:11 Establish a Mat Maintenance Routine
   • 1:40–1:55 Deploy and Secure Floor Safety Mats
   • 0:58–1:29 Vacuum Loose Debris