Apply Anti-Slip Strip

What happens in this clip

Carefully peel back a section of the protective backing from one end of a pre-cut anti-slip strip. Align the exposed adhesive side of the strip along the edge of the stair, ensuring it is straight and centered. Slowly press the exposed part of the strip onto the stair, working from one end to the other, while gradually peeling off the rest of the backing. Once the entire strip is in place, firmly press down along its entire length with your hands to ensure good adhesion and to remove any trapped air bubbles.

Goal: Secure the anti-slip strip firmly to the stair edge

What's used

Tools

• Hands
• Squeegee

Materials

• Anti-slip staircase guard strip

About the full video

This project demonstrates the simple process of installing anti-slip "staircase guards" to prevent slips and falls on stairs. It involves preparing the stair surface, applying self-adhesive strips to the edge of each step, and trimming them to fit, significantly enhancing stair safety.

Step 3 of 4: Apply Anti-Slip Tape

Peel back a small section of the backing paper from one end of the cut anti-slip tape. Align the tape with the edge of the stair nosing and carefully press it down, gradually peeling off the backing paper as you go. Use a roller or a firm flat object to press the tape down, ensuring there are no air bubbles or wrinkles. Work from the center outwards to push out any trapped air.

Open this step in the guide

Every video in How to Add Grip to Stair Nosings

1. Step 1: Clean Stair Nosing Surface

   • 0:04–0:07 Clean the Staircase
   • 0:36–0:41 Clean and Smooth Stairs
   • 0:18–0:31 Clean the Stairs

2. Step 2: Prepare Anti-Slip Tape

   • 0:20–0:25 Measure and Cut Anti-Slip Tape
   • 0:02 Measure and Cut Anti-Slip Strip
   • 1:10–1:11 Size and Customize Anti-Slip Materials

3. Step 3: Apply Anti-Slip Tape

   • 0:02–0:06 Apply Anti-Slip Strip (this video)
   • 0:25–0:39 Position and Adhere Tape
   • 0:39–0:52 Activate Adhesive with Roller

4. Step 4: Allow Tape to Cure

   • 3:44–4:26 Final Curing and Caulking
   • 0:39–0:46 Allow Tuff Grip to Dry and Cure