Clean the Stairs

What happens in this clip

Begin by ensuring your stairs are thoroughly clean. Use a dust pan and brush to sweep away all dirt, dust, and debris from top to bottom. Follow up by wiping down the surface of each stair with a damp rag to remove any lingering unwanted stains or marks. This critical step ensures optimal adhesion for the anti-slip treads.

Goal: Ensure stairs are clean and free of dirt, debris, stains, and marks.

What's used

Tools

• Damp rag
• Sponge
• Dust pan and brush
• Broom

About the full video

This video provides step-by-step instructions on how to easily install anti-slip stair treads on hardwood stairs, covering essential preparation, precise measurement for alignment, and proper application techniques to ensure a secure and bubble-free finish.

Step 1 of 4: Clean Stair Nosing Surface

Using a stiff brush and a degreasing cleaner, scrub the entire surface of each stair nosing. For stubborn residues, a mild abrasive pad may be necessary. Rinse the stairs with clean water and allow them to dry completely before proceeding. A final wipe down with rubbing alcohol can ensure a pristine surface.

Open this step in the guide

Every video in How to Add Grip to Stair Nosings

1. Step 1: Clean Stair Nosing Surface

   • 0:04–0:07 Clean the Staircase
   • 0:36–0:41 Clean and Smooth Stairs
   • 0:18–0:31 Clean the Stairs (this video)

2. Step 2: Prepare Anti-Slip Tape

   • 0:20–0:25 Measure and Cut Anti-Slip Tape
   • 0:02 Measure and Cut Anti-Slip Strip
   • 1:10–1:11 Size and Customize Anti-Slip Materials

3. Step 3: Apply Anti-Slip Tape

   • 0:02–0:06 Apply Anti-Slip Strip
   • 0:25–0:39 Position and Adhere Tape
   • 0:39–0:52 Activate Adhesive with Roller

4. Step 4: Allow Tape to Cure

   • 3:44–4:26 Final Curing and Caulking
   • 0:39–0:46 Allow Tuff Grip to Dry and Cure