powered by

Apply New Wall Color

From Reading Nook Conversion · Step 6 of 9 · Video by Ace Hardware

Showing 1:44–2:29 of the source video. Watch the full video with every moment.

What happens in this clip

After the primer has dried according to manufacturer instructions, it's time to apply your new wall color. The video uses 'Clark+Kensington Stone Fireplace' paint. First, prepare your brush: dip it halfway into the paint and offload any excess by pressing it against the inside of the paint can or a bucket. Use this paintbrush to 'cut in' a 2 to 3 inch border around the edges of the wall and any frames. It is recommended to paint one wall at a time to maintain a wet edge. Once the cutting-in is complete, open the paint can, stir the paint thoroughly, and then pour it into a paint tray with a liner. Begin rolling the main areas of the wall, using a technique called 'working to a wet edge.' Roll back and forth across the wall in a series of W or V shaped strokes, ensuring continuous coverage from top to bottom. This technique prevents lap marks and ensures a uniform finish. Apply additional coats as needed until the desired color depth and coverage are achieved, allowing adequate drying time between coats.

Goal: Apply the new wall color for a finished look.

What's used

Tools

  • Paint Can Opener
  • Paint Roller
  • Paint Tray Liner
  • Paint Tray
  • Paintbrush
  • Roller Frame
  • Stir Stick

Materials

  • Clark+Kensington Stone Fireplace Paint Clark+Kensington
  • Sherwin-Williams SuperPaint Interior Acrylic Latex

About the full video

This DIY project provides a step-by-step guide on how to effectively paint over a dark-colored wall with a new, lighter paint color. It covers essential preparation steps such as cleaning, repairing, and priming the wall, followed by the application of the final paint color using proper techniques to ensure a smooth, uniform, and long-lasting finish.

What's said in this clip

that's okay it's supposed to look like that my next step is to paint the wall color which is clark and kensington's stone fireplace dip the brush halfway into the paint and offload some of the paint by pushing the brush on the inside of the paint can or bucket first use a paint brush to cut in 2 or 3 inches around the edges of the wall and the frame of your room i recommend painting one wall at a time once you've cut in it's time to start rolling [Music] one of the best painting techniques for walls is called working to a wet edge working top to bottom roll back and forth across the wall in a series of w or v shaped strokes until the section is

Automatically transcribed from the source video.

Step 6 of 9: Paint or Wallpaper Walls

Apply primer if necessary, especially if changing colors dramatically or covering stains. Apply your chosen paint color or wallpaper according to manufacturer instructions. Ensure even coverage and allow adequate drying time between coats.

Open this step in the guide

Every video in Reading Nook Conversion

  1. Step 1: Clear the Closet

  2. Step 2: Inspect and Clean Walls

  3. Step 3: Assess Electrical Needs

  4. Step 4: Install Lighting

  5. Step 5: Prepare Walls for Finishing

  6. Step 6: Paint or Wallpaper Walls

  7. Step 7: Install Shelving

  8. Step 8: Add Seating

  9. Step 9: Add Decorative Touches

Questions about Reading Nook Conversion

The project summary lists '4 minutes' as the estimated time, but it includes painting and electrical. Is this accurate?

The '4 minutes' refers specifically to the initial 'Clear the Closet' step, which is categorized under cleaning. The entire conversion, including wall prep, painting, electrical work, and adding furnishings, will take significantly longer, likely several hours to a full weekend, depending on your skill and the extent of modifications.

Besides basic household items, what specific tools are necessary for the electrical part of this project?

For safely installing the light fixture, you'll specifically need a wire cutter or stripper, a Phillips screwdriver, and crucially, a voltage/circuit tester to confirm power is off. Electrical tape is also listed as a material for insulating connections.

My under-stair closet walls are rough or have holes. How should I prepare them before painting or wallpapering?

After cleaning, use spackling and patching compound to fill any holes or smooth imperfections. Sand these areas once dry until smooth, then apply a coat of primer, especially if the walls are dark or stained, to ensure even paint coverage and better adhesion.

What are good strategies for making a small under-stair closet feel more spacious and functional as a reading nook?

Opt for floating shelves rather than bulky bookcases to save floor space. Choose compact, comfortable seating like a floor cushion or a small, armless chair. Using light paint colors and good lighting will also help the space feel brighter and more open.

I'm hesitant to do electrical work. Are there alternative lighting options for my reading nook?

Yes, you can use plug-in sconces, LED strip lights, or battery-operated puck lights. These options provide illumination without requiring permanent electrical installation. Ensure any plug-in lights have a convenient outlet nearby and can be safely routed.

Reading Nook Conversion

Transform an under-stair closet into a cozy and functional reading space by clearing, potentially modifying walls, adding lighting, comfortable seating, and shelving.

Read the full guide Browse all guides

Planning this project? Shop Oak Valley Designs.

Apply New Wall Color — Reading Nook Conversion | Oak Valley Designs

Subscribe for exclusive updates

Be the first to know about promotions, new products, and sales.