Apply Protective Finish

What happens in this clip

After the entire stenciled floor is completely dry (allow at least 24-48 hours for the paint to cure), apply 2-3 coats of water-based polyurethane. This protective layer will seal the paint, protect the floor from wear and tear, and make it easier to clean. Use a clean paint roller or applicator specifically designed for polyurethane, following the manufacturer's instructions for application and drying times between coats.

Goal: Protect the stenciled floor from wear and tear

What's used

Tools

• Paint Roller
• High-quality paintbrush for edges
• Water-Based Polyurethane

About the full video

This project guides you through stenciling a floor with a multi-color Granada tile pattern. It covers preparing the surface with primer and a base coat, applying the stencil with adhesive, using a specialized stenciling technique with multiple paint colors, repeating the pattern across the floor, and finally protecting the finished design with polyurethane.

Step 6 of 6: Apply Protective Topcoat (Optional)

If desired for extra durability in a high-traffic area, apply one or two thin coats of a clear water-based polyurethane or a durable acrylic sealer. Use a high-quality synthetic brush and apply evenly. Allow each coat to dry completely as per the product instructions before applying the next coat or allowing foot traffic.

Open this step in the guide

Other videos for this step

• Finalize with Protective Topcoat
• Protect with Polyurethane