Clean and Smooth Stairs

What happens in this clip

Before starting the installation, ensure that the existing stairs are thoroughly cleaned and smoothed. Use a broom to remove any dust, debris, or loose particles from the risers and treads. A clean and smooth surface is essential for proper adhesion and a professional finish.

Goal: Prepare the existing stairs for installation

What's used

Tools

• Broom

About the full video

This project provides step-by-step instructions for properly installing performance accessory stair treads and risers. It covers preparation, precise measuring and cutting, adhesive application, securing with a finish nailer, caulking expansion gaps, and installing optional return trim for exposed stair sides. The guide emphasizes the importance of specific adhesive types and proper expansion gaps for a durable and aesthetically pleasing finish.

Step 1 of 6: Clean Porch Steps

Before installing carpet treads, it is crucial to prepare the porch steps. Use a stiff brush or broom to sweep away loose dirt and debris. For stubborn grime or old finishes, a power washer or a stiff brush with a cleaning solution (like a mild detergent and water) may be necessary. Rinse the steps thoroughly and allow them to dry completely before proceeding.

Open this step in the guide

Every video in How to Install Carpet Treads on Covered Porch Steps

1. Step 1: Clean Porch Steps

   • 0:34–0:40 Clean the Stairs
   • 0:04–0:07 Clean the Staircase
   • 0:36–0:41 Clean and Smooth Stairs (this video)

2. Step 2: Measure and Mark Carpet Treads

   • 7:20–9:07 Measure and Cut Carpet
   • 2:09–3:19 Measure and Cut Carpet Pieces
   • 0:46–1:05 Measure and Cut Underlayment

3. Step 3: Cut Carpet Treads

   • 8:08–9:23 Cut Carpet Pieces
   • 1:33–1:54 Cut Carpet to Size
   • 2:09–3:19 Measure and Cut Carpet Pieces

4. Step 4: Apply Adhesive to Steps

   • 0:09–0:25 Apply Flooring Adhesive
   • 0:05–0:08 Apply Spray Adhesive
   • 0:21–0:28 Apply Adhesive to Stair Tread

5. Step 5: Position and Press Carpet Treads

   • 0:04–0:06 Install Carpet Treads
   • 0:21–0:26 Press Down Firmly
   • 0:06–0:14 Install Carpet Treads

6. Step 6: Secure Edges (Optional)

   • 0:02–0:06 Apply Anti-Slip Strip
   • 7:23–7:44 Secure Step Treads with Adhesive