Install Carpet Treads

What happens in this clip

Starting from the bottom stair, carefully align the first carpet tread according to your predetermined placement (e.g., centered, with a consistent gap from the sides and front edge). Press down firmly, working from the center outwards, to ensure good contact between the adhesive and the stair surface. Apply pressure evenly across the entire surface of the tread. Repeat this process for each subsequent stair, moving upwards. Take your time to ensure each tread is straight and securely adhered. For added security, you can use a small roller or your hands to press down on the entire surface of each tread after placement. The video shows the Golden Retriever comfortably using the stairs, indicating the treads are securely installed.

Goal: Securely attach all carpet treads to the stairs.

What's used

Tools

• Carpet Stair Treads (prepared)
• Small Roller
• even pressure to secure treads.

About the full video

This DIY project provides a comprehensive guide to installing carpet treads on existing stairs. The goal is to enhance safety and comfort, particularly for pets like dogs, by providing increased traction and cushioning. The process involves preparing the stairs, selecting appropriate treads, and securely attaching them, resulting in a more pet-friendly and aesthetically pleasing staircase.

Step 5 of 6: Position and Press Carpet Treads

Starting from the back of the step and working forward, carefully align the carpet tread with the edge of the step. Once positioned, press down firmly and evenly across the entire surface of the tread. Use your hands or a roller to ensure there are no air bubbles and that the tread is securely adhered to the step.

Open this step in the guide

Every video in How to Install Carpet Treads on Covered Porch Steps

1. Step 1: Clean Porch Steps

   • 0:34–0:40 Clean the Stairs
   • 0:04–0:07 Clean the Staircase
   • 0:36–0:41 Clean and Smooth Stairs

2. Step 2: Measure and Mark Carpet Treads

   • 7:20–9:07 Measure and Cut Carpet
   • 2:09–3:19 Measure and Cut Carpet Pieces
   • 0:46–1:05 Measure and Cut Underlayment

3. Step 3: Cut Carpet Treads

   • 8:08–9:23 Cut Carpet Pieces
   • 1:33–1:54 Cut Carpet to Size
   • 2:09–3:19 Measure and Cut Carpet Pieces

4. Step 4: Apply Adhesive to Steps

   • 0:09–0:25 Apply Flooring Adhesive
   • 0:05–0:08 Apply Spray Adhesive
   • 0:21–0:28 Apply Adhesive to Stair Tread

5. Step 5: Position and Press Carpet Treads

   • 0:04–0:06 Install Carpet Treads (this video)
   • 0:21–0:26 Press Down Firmly
   • 0:06–0:14 Install Carpet Treads

6. Step 6: Secure Edges (Optional)

   • 0:02–0:06 Apply Anti-Slip Strip
   • 7:23–7:44 Secure Step Treads with Adhesive