Final Review and Cleanup

What happens in this clip

After all the carpet has been installed and secured, a final review of the entire stair section is performed. This includes checking for any loose edges, exposed staples or pins, and uneven areas. Any remaining carpet scraps or debris are removed, and the area is vacuumed to ensure a clean and finished look. The presenter emphasizes the importance of these final touches for a professional outcome.

Goal: Ensure a clean and professional carpet installation

What's used

Tools

• Vacuum Cleaner

About the full video

This video provides a detailed guide on how to install loop pile carpet on a complex 'bird cage' style bottom stair, which features curved sections and multiple balusters. The process includes measuring and pre-cutting the carpet, securing it with an electric stapler, utilizing a knee kicker for stretching, and meticulously making precise relief cuts around the balusters and bullnose to achieve a seamless and professional finish without damaging the delicate loop pile.

Step 8 of 8: Inspect and Clean Up

Walk up and down the stairs, pressing on each tread to ensure it is firmly attached and there are no loose edges or signs of lifting. Check that all treads are aligned properly and present a consistent look. Remove any tools, excess materials, or adhesive residue from the stairs and surrounding areas. Vacuum the stairs to remove any stray carpet fibers or dust.

Open this step in the guide

Every video in How to Install Carpet Stair Treads on Curved Stairs

1. Step 1: Measure Tread Dimensions

   • 0:00–0:03 Measure Individual Stair Components
   • 0:12–0:57 Measure and Cut Carpet Tread
   • 0:29–1:33 Prepare Stairs and Measure Grippers

2. Step 2: Create a Template for Each Tread

   • 1:15–3:04 Create Template for First Winder Step
   • 0:59–1:36 Creating Custom Templates for Each Step
   • 4:33–5:37 Create Template for Second Winder Step

3. Step 3: Cut Carpet Treads from Templates

   • 8:08–9:23 Cut Carpet Pieces
   • 6:52–8:08 Transfer Templates to Carpet Backing
   • 2:09–3:19 Measure and Cut Carpet Pieces

4. Step 4: Prepare Stair Surface

   • 0:34–0:40 Clean the Stairs
   • 0:17–0:34 Prepare the Stairs
   • 0:00–0:05 Prepare Stairs and Treads

5. Step 5: Apply Adhesive

   • 0:05–0:06 Apply Adhesive to Treads
   • 0:04–0:08 Apply Spray Adhesive
   • 0:34–0:46 Apply Carpet Adhesive to Stairs

6. Step 6: Attach Carpet Tread to Stair

   • 0:11–0:43 Install Remaining Carpet Stair Treads
   • 0:04–0:06 Install Carpet Treads
   • 1:16–2:09 Install Carpet Treads with Adhesive

7. Step 7: Secure Edges and Trim

   • 3:53–7:38 Trim Excess Carpet and Prepare Final Riser
   • 2:25–3:45 Position and Secure Carpet Edges
   • 2:42–3:56 Secure the First Section with Staples

8. Step 8: Inspect and Clean Up

   • 3:59–4:29 Final Trimming and Inspection
   • 16:47–18:07 Final Review and Cleanup (this video)
   • 0:46–0:57 Final Inspection and Cleanup