Install Carpet Treads

What happens in this clip

Starting from the bottom stair, carefully align the first carpet tread according to your predetermined placement (e.g., centered, with a consistent gap from the sides and front edge). Press down firmly, working from the center outwards, to ensure good contact between the adhesive and the stair surface. Apply pressure evenly across the entire surface of the tread. Repeat this process for each subsequent stair, moving upwards. Take your time to ensure each tread is straight and securely adhered. For added security, you can use a small roller or your hands to press down on the entire surface of each tread after placement. The video shows the Golden Retriever comfortably using the stairs, indicating the treads are securely installed.

Goal: Securely attach all carpet treads to the stairs.

What's used

Tools

• Carpet Stair Treads (prepared)
• Small Roller
• even pressure to secure treads.

About the full video

This DIY project provides a comprehensive guide to installing carpet treads on existing stairs. The goal is to enhance safety and comfort, particularly for pets like dogs, by providing increased traction and cushioning. The process involves preparing the stairs, selecting appropriate treads, and securely attaching them, resulting in a more pet-friendly and aesthetically pleasing staircase.

Step 6 of 8: Attach Carpet Tread to Stair

Align the carpet tread with the stair tread, starting from the back or the nose of the stair and working your way down. Press the carpet firmly into the adhesive, smoothing out any wrinkles or air bubbles. For curved stairs, pay extra attention to ensuring the carpet conforms to the curve and is securely adhered along its entire surface, particularly at the edges and any tight curves. Use a seam roller or your hands to ensure maximum contact.

Open this step in the guide

Every video in How to Install Carpet Stair Treads on Curved Stairs

1. Step 1: Measure Tread Dimensions

   • 0:00–0:03 Measure Individual Stair Components
   • 0:12–0:57 Measure and Cut Carpet Tread
   • 0:29–1:33 Prepare Stairs and Measure Grippers

2. Step 2: Create a Template for Each Tread

   • 1:15–3:04 Create Template for First Winder Step
   • 0:59–1:36 Creating Custom Templates for Each Step
   • 4:33–5:37 Create Template for Second Winder Step

3. Step 3: Cut Carpet Treads from Templates

   • 8:08–9:23 Cut Carpet Pieces
   • 6:52–8:08 Transfer Templates to Carpet Backing
   • 2:09–3:19 Measure and Cut Carpet Pieces

4. Step 4: Prepare Stair Surface

   • 0:34–0:40 Clean the Stairs
   • 0:17–0:34 Prepare the Stairs
   • 0:00–0:05 Prepare Stairs and Treads

5. Step 5: Apply Adhesive

   • 0:05–0:06 Apply Adhesive to Treads
   • 0:04–0:08 Apply Spray Adhesive
   • 0:34–0:46 Apply Carpet Adhesive to Stairs

6. Step 6: Attach Carpet Tread to Stair

   • 0:11–0:43 Install Remaining Carpet Stair Treads
   • 0:04–0:06 Install Carpet Treads (this video)
   • 1:16–2:09 Install Carpet Treads with Adhesive

7. Step 7: Secure Edges and Trim

   • 3:53–7:38 Trim Excess Carpet and Prepare Final Riser
   • 2:25–3:45 Position and Secure Carpet Edges
   • 2:42–3:56 Secure the First Section with Staples

8. Step 8: Inspect and Clean Up

   • 3:59–4:29 Final Trimming and Inspection
   • 16:47–18:07 Final Review and Cleanup
   • 0:46–0:57 Final Inspection and Cleanup