Finalize Tread Placement

What happens in this clip

Continue the process of preparing and securing the remaining carpet treads. It can be helpful to pre-mark the correct positioning on each step before applying the treads, ensuring a "plug and play" installation for increased efficiency. While using nails for extra security is an option, the double-sided tape method is highlighted as a simple, effective, and less invasive alternative for securing the treads to your stairs.

Goal: Install carpet treads on all desired stairs.

What's used

Tools

• Utility Knife DeWalt

Materials

• Carpet Treads Canyon

About the full video

This project provides a step-by-step guide on how to install carpet treads on hardwood stairs using double-sided carpet tape. The process involves preparing the treads, accurately positioning them, and securing them to enhance safety and aesthetics without requiring advanced tools or skills.

Step 5 of 6: Install Securing Mechanism

Decide on your method for securing the treads. For removable treads, heavy-duty Velcro strips are a common choice. Attach one side of the Velcro to the underside of the tread and the corresponding side to the top of the riser or the nosing of the stair below. Alternatively, small L-brackets can be screwed into the underside of the tread and the riser, ensuring screws are short enough not to penetrate the hardwood from the other side. Another option is strong double-sided carpet tape. Ensure the chosen method allows for easy removal without damaging the hardwood.

Open this step in the guide

Every video in How to Protect Hardwood Stairs from Wear with Removable Treads

1. Step 1: Measure Stair Treads

   • 0:57–1:16 Measure Treads and Mark Laminate
   • 0:43–0:52 Measure and Cut New Treads
   • 0:41–1:06 Measure and Mark Treads

2. Step 2: Cut Tread Material

   • 0:19–0:22 Measure and Cut FastTread
   • 4:34–5:55 Measure and Cut Treads
   • 0:55–1:05 Measure and Cut First Tread

3. Step 3: Prepare Tread Edges (Optional)

   • 7:51–8:14 Round Over Edges and Sand Treads
   • 5:16–7:59 Round Over Tread Edges
   • 0:08–1:13 Prepare and Finish Wood Stair Treads

4. Step 4: Test Fit Treads

   • 2:13–2:35 Test Fit and Adjust Treads
   • 1:35–1:41 Dry Fit Tread and Nosing
   • 1:38–1:50 Dry-Fit Laminate Pieces to Each Tread

5. Step 5: Install Securing Mechanism

   • 3:25–4:32 Secure Treads to Stairs
   • 4:32–5:29 Finalize Tread Placement (this video)
   • 0:49–2:35 Install the Tread and Nosing Components

6. Step 6: Install Protective Treads

   • 0:20–0:37 Apply Stair Treads
   • 0:10–0:16 Install the Stair Treads
   • 0:59–2:07 Install First Stair Tread