powered by

Install the Tread and Nosing Components

From How to Protect Hardwood Stairs from Wear with Removable Treads · Step 5 of 6 · Video by MrYoucandoityourself

Showing 0:49–2:35 of the source video. Watch the full video with every moment.

What happens in this clip

Following the riser installation, focus on the tread and nosing for each step. If your tread requires multiple hardwood planks to cover its width, interlock them using wood glue on the tongue and groove joints for enhanced stability. Next, apply construction adhesive in a wavy pattern across the entire plywood sub-tread. Carefully position the assembled hardwood tread onto the adhesive, making sure it fits snugly against the installed riser and aligns correctly along the open side of the staircase. Tap the tread gently with a rubber mallet to ensure full contact and a tight fit. The video demonstrates cutting angled flooring pieces with a utility knife to fit the open side. Finally, install the nosing: apply wood glue to its groove (or tongue) and construction adhesive to the edge of the sub-tread and the top of the riser. Position the nosing, tap it with a rubber mallet, and blind-nail it through the tongue into the sub-tread, or face-nail if necessary (ensuring nails are counter-sunk and later filled). Use shims or small wedges to hold all components tightly in place while the adhesive cures.

Goal: Securely install the hardwood tread surface and its associated nosing.

What's used

Tools

  • Air Compressor
  • Hardwood Flooring Planks
  • Engineered hardwood planks
  • Hardwood Nosing
  • Milled hardwood lumber
  • Pneumatic Nail Gun Hitachi
  • Floor stapler/nailer
  • Rubber Mallet
  • ensuring a tight fit without damaging the wood.
  • Shims/Wedges
  • Construction shims
  • Utility Knife
  • Circular saw
  • especially for angled sections.

Materials

  • Construction Adhesive Loctite PL Premium 3X Stronger
  • Titebond PROvantage Construction Adhesive
  • Finish Nails
  • Flooring cleats
  • primarily for blind-nailing.
  • Wood Glue
  • Polyurethane wood glue

About the full video

This project provides a comprehensive guide on installing hardwood flooring, including custom nosing, risers, and treads, onto an open-sided staircase. It covers the essential steps of precise measuring, cutting, adhesive application, and secure fastening techniques to achieve a professional and durable finish.

Step 5 of 6: Install Securing Mechanism

Decide on your method for securing the treads. For removable treads, heavy-duty Velcro strips are a common choice. Attach one side of the Velcro to the underside of the tread and the corresponding side to the top of the riser or the nosing of the stair below. Alternatively, small L-brackets can be screwed into the underside of the tread and the riser, ensuring screws are short enough not to penetrate the hardwood from the other side. Another option is strong double-sided carpet tape. Ensure the chosen method allows for easy removal without damaging the hardwood.

Open this step in the guide

Every video in How to Protect Hardwood Stairs from Wear with Removable Treads

  1. Step 1: Measure Stair Treads

  2. Step 2: Cut Tread Material

  3. Step 3: Prepare Tread Edges (Optional)

  4. Step 4: Test Fit Treads

  5. Step 5: Install Securing Mechanism

  6. Step 6: Install Protective Treads

How to Protect Hardwood Stairs from Wear with Removable Treads

This project outlines the process of creating and installing removable treads to protect hardwood stairs from wear. It involves measuring, cutting, and fitting treads that can be easily secured and removed without damaging the original hardwood.

Read the full guide Browse all guides

Planning this project? Shop Oak Valley Designs.

Install the Tread and Nosing Components — How to Protect Hardwood Stairs from Wear with Removable Treads | Oak Valley Designs

Subscribe for exclusive updates

Be the first to know about promotions, new products, and sales.