Install Carpet Treads with Adhesive
From how to prepare and clean stairs before installing carpet treads · Step 1 of 2 · Video by Oak Valley Designs
Showing 1:16–2:09 of the source video.
What happens in this clip
Take a carpet tread from its box. The easiest and most rewarding part is installation. First, peel off the protective backing from the adhesive strip on the back of the tread. Position the carpet tread by hooking its bullnose (the front edge) underneath the bottom edge of the stair tread. Then, gently pull back on the tread with one hand to ensure it's nice and tight against the bullnose. Once taut, press firmly across the entire surface of the tread, ensuring it adheres securely. Use the painter's tape as a guide to maintain perfect alignment, ensuring everything is straight.
Goal: Peel off the protective backing from the carpet tread, hook it under the bullnose of the stair, and then firmly press and align it using the painter's tape guide.
What's used
Tools
- Carpet treads
About the full video
This project provides step-by-step instructions for easily installing carpet treads onto stairs using strong adhesive tape. It covers preparing the stairs by cleaning them, marking alignment with painter's tape, and then securely attaching the self-adhesive carpet treads for a secure and streamlined look.
What's said in this clip
Okay, the easiest part and the most rewarding part after all your measuring and hard work. These are your treads. They come in a box. Okay, all you do is peel off the back. Throw that in the floor. I've already put a few on, so I'm going to do the top step. Now, you see our painters tape is still here to guide us on the edge. So, everything is in alignment. You come to the next step and the first thing you do is hook the bullnose underneath the bottom edge and then pull back with this hand to make sure that it's nice and tight. So, as you press on the front and you pull on the back, put a little pressure across the tread, make sure it's lined up with the painters tape, and that's it. It's that easy.
Automatically transcribed from the source video.
Step 1 of 2: Time to Peel: Unveiling the Adhesive Backing
With a steady hand, carefully peel away the protective plastic liner from the adhesive backing of your Oak Valley Designs carpet stair tread. This simple step exposes the special pressure-sensitive adhesive, ready to create a secure, yet non-damaging, bond with your staircase. You're one step closer to a safer, more beautiful home!
Other videos for this step
how to prepare and clean stairs before installing carpet treads
Transforming your staircase with Oak Valley Designs carpet stair treads is an incredibly easy DIY project, bringing safety and style to your home in no time! Our treads feature a unique, pressure-sensitive adhesive backing that allows for simple, secure installation and removal, all without damaging your beautiful wooden stairs. The entire process for a standard staircase is surprisingly quick, often taking just about 20 minutes. Once your stairs are clean, dry, and ready for their elegant upgrade, simply 'clean, peel, and stick' each tread into place. You'll enjoy the peace of mind that comes with a safer, more stylish staircase, knowing our treads are designed for easy removal and replacement, preserving your stairs for years to come. It’s the Oak Valley Difference — quality, convenience, and care, all in one.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.