Place and Secure First Tread

What happens in this clip

Once the stairs are clean and dry, begin installing the carpet treads. The video shows a person carefully positioning the first tread onto a wooden step. Align the tread by ensuring it is centered or placed according to any pre-marked guidelines. Once positioned correctly, press down firmly across the entire surface of the tread, paying particular attention to the edges and corners, to activate the adhesive backing (if applicable) or secure the non-slip material. Use your hands to smooth out any air bubbles and ensure full contact with the stair surface.

Goal: Properly place and secure the first carpet stair tread.

What's used

Tools

• Hands
• J-Roller or Seam Roller
• Heavy book wrapped in cloth

Materials

• Oak Valley Designs Carpet Stair Treads Oak Valley Designs

Pro tips for this step

• Oak Valley Designs Pro Tip: Press firmly and evenly across the whole tread to make sure the adhesive sticks securely for lasting safety.

These safety tips are AI-generated and have not been verified by a professional. They may be incomplete or incorrect. Verify independently against manufacturer instructions and local codes, and consult a qualified professional before relying on them. This is not a substitute for professional advice.

Shop this step at Oak Valley Designs

• Bayside Charm - Tread

About the full video

This DIY project demonstrates the straightforward process of installing carpet stair treads on a wooden staircase using pre-manufactured treads. The project aims to enhance safety, reduce noise, and improve the aesthetic appeal of stairs. The process involves unboxing the treads, preparing the staircase, carefully placing and aligning each tread, and securing them to achieve a professional and finished look.

Step 2 of 2: Position and Secure Your Tread

Carefully position your Oak Valley Designs carpet stair tread onto the pre-cleaned step or landing area. Take a moment to ensure it’s perfectly aligned with your intended placement. Once satisfied, apply firm, even pressure across the entire surface of the tread. This ensures the pressure-sensitive adhesive makes full, secure contact with your stair surface, creating a stable and safe foundation for every step. Remember, good contact means lasting security!

Open this step in the guide

Every video in how to install carpet stair treads

1. Step 1: Expose the Adhesive: Peel the Protective Liner

   • 0:16–0:21 Apply Peel-and-Stick Carpet Treads
   • 0:14–0:17 Peel Backing from Tread
   • 0:08–0:10 Prepare the Self-Adhesive Stair Tread

2. Step 2: Position and Secure Your Tread

   • 0:17–0:21 Position and Adhere Treads
   • 0:10–0:13 Secure the First Tread
   • 0:10–0:18 Place and Secure First Tread (this video)