Prepare the Stair Treads

What happens in this clip

Take each individual carpet stair tread and prepare it for installation. The treads shown in the video feature a pre-applied adhesive backing covered by a protective plastic film. Carefully peel off this plastic film to expose the adhesive layer. The video shows the adhesive applied in a distinctive wavy pattern, designed to provide strong grip. Only remove the film when you are ready to apply the tread to prevent the adhesive from collecting dust or drying out.

Goal: Expose the adhesive on the back of each stair tread

What's used

Materials

• Carpet Stair Treads (with pre-applied adhesive)
• Non-slip rubber or vinyl stair mats
• reduce noise
• and prevent slips.

Pro tips for this step

• Oak Valley Designs Pro Tip: Gently peel the protective liner to expose the adhesive, ensuring it's ready for a secure, non-damaging bond.

These safety tips are AI-generated and have not been verified by a professional. They may be incomplete or incorrect. Verify independently against manufacturer instructions and local codes, and consult a qualified professional before relying on them. This is not a substitute for professional advice.

Shop this step at Oak Valley Designs

• Bayside Charm - Tread

About the full video

This project guides you through the simple process of installing pre-adhesive carpet stair treads to an existing wooden staircase. It involves thoroughly cleaning the stairs, peeling the protective backing from each tread, and then carefully positioning and firmly pressing the treads onto the steps. This DIY project transforms a bare wooden staircase into a more comfortable, quieter, and slip-resistant surface with an improved aesthetic.

Step 1 of 2: Prepare Your Treads: Peel the Protective Liner

With care and precision, begin to peel the protective plastic liner from the adhesive backing on each of your Oak Valley Designs carpet stair treads. This simple action will reveal our unique, non-damaging pressure-sensitive adhesive, ready to securely bond your tread to your staircase, offering a better way to tread.

Open this step in the guide

Every video in how to replace worn carpet stair treads

1. Step 1: Prepare Your Treads: Peel the Protective Liner

   • 0:07–0:10 Prepare the Stair Treads (this video)
   • 0:16–0:21 Apply Peel-and-Stick Carpet Treads
   • 0:08–0:10 Prepare the Self-Adhesive Stair Tread

2. Step 2: Secure Your Tread: Firmly Press into Place

   • 0:11–0:17 Install the Stair Tread onto the Stair
   • 0:10–0:13 Secure the First Tread
   • 0:10–0:18 Place and Secure First Tread