Babelio: Boundless B17 Baby Safety Gate | Installation

Moments in this video

1. 0:03–0:05 Measure the width of the opening From Childproof Stair Banister, Step 1: Measure Banister Gaps

   Using a tape measure, carefully determine the exact width of the opening where the baby gate will be installed. Measure from one mounting surface (e.g., a banister post) to the other (e.g., a wall). This measurement is crucial for ensuring the correct fit and stability of the gate.

2. 0:08–0:09 Determine the position of the upper hinge From How to Install a Baby Gate on Stairs with a Banister on One Side and a Wall on the Other, Step 1: Determine Gate Placement

   Temporarily position the baby gate in the opening. Place the upper hinge component against the desired mounting surface (e.g., a wall or banister post) where the gate will swing. Ensure it is level and at the appropriate height as per the gate's instructions.

3. 0:54–0:57 Ensure the gate is functioning properly From Childproof Stair Banister, Step 6: Final Safety Check

   Thoroughly test the installed baby gate. Open and close it multiple times to ensure smooth operation of the hinges and reliable engagement of the latching mechanism. Pay special attention to the distance between the gate's handle and the upper latch receiver; the video indicates this distance should be less than 1 millimeter (approximately 0.078 inches) when the gate is securely closed, signifying a proper, safe closure. If the gap is larger, readjust the gate's width or latch positions as needed.

Guides that use this video

• Childproof Stair Banister
• How to Install a Baby Gate on Stairs with a Banister on One Side and a Wall on the Other