How to Stain Wood Like a PRO - 4 Simple Steps!

Moments in this video

1. 8:35–9:10 Apply Water-Based Topcoat From Stair Banister Refinishing, Step 5: Apply Protective Topcoat

   For a second option, apply Minwax Polycrylic (a water-based clear topcoat) to another sanded and pre-stained board (Piece D). This finish goes on similarly to the oil-based poly but requires working quickly, especially on large projects, as it dries very fast. Apply a thin, even coat with a foam brush. The finish may appear milky when wet but will dry clear. Allow about two hours for the first coat to dry, then lightly sand with 320-grit sandpaper, clean off dust, and apply a second coat. Three coats are typically sufficient for good coverage and protection.

The guide that use this video

• Stair Banister Refinishing