Installing Indoor Outdoor Carpet on Garage Steps.

Moments in this video

1. 0:34–0:46 Apply Carpet Adhesive to Stairs From How to Install Carpet Treads on a Spiral Staircase, Step 4: Apply Adhesive (if required)

   Prepare the carpet adhesive by stirring it thoroughly. Use a small piece of scrap cardboard or a protective sheet to shield the wall and any already carpeted areas from excess adhesive. Using a specialized adhesive spreader (trowel) with appropriate notched teeth, apply a generous and even layer of carpet adhesive to the surface of the stair tread and riser you are currently working on. Ensure the entire area to be covered by carpet is coated with adhesive for optimal bonding. The notched trowel helps create ridges in the adhesive, which promotes stronger adhesion and proper curing.

2. 0:34–0:46 Apply Carpet Adhesive to Stairs From How to Install Carpet Stair Treads on Curved Stairs, Step 5: Apply Adhesive

   Prepare the carpet adhesive by stirring it thoroughly. Use a small piece of scrap cardboard or a protective sheet to shield the wall and any already carpeted areas from excess adhesive. Using a specialized adhesive spreader (trowel) with appropriate notched teeth, apply a generous and even layer of carpet adhesive to the surface of the stair tread and riser you are currently working on. Ensure the entire area to be covered by carpet is coated with adhesive for optimal bonding. The notched trowel helps create ridges in the adhesive, which promotes stronger adhesion and proper curing.

3. 0:34–0:46 Apply Carpet Adhesive to Stairs From How to Install Carpet Treads on Concrete Basement Stairs, Step 4: Apply Adhesive

   Prepare the carpet adhesive by stirring it thoroughly. Use a small piece of scrap cardboard or a protective sheet to shield the wall and any already carpeted areas from excess adhesive. Using a specialized adhesive spreader (trowel) with appropriate notched teeth, apply a generous and even layer of carpet adhesive to the surface of the stair tread and riser you are currently working on. Ensure the entire area to be covered by carpet is coated with adhesive for optimal bonding. The notched trowel helps create ridges in the adhesive, which promotes stronger adhesion and proper curing.

4. 0:34–0:46 Apply Carpet Adhesive to Stairs From How to Choose and Install Wool vs Synthetic Carpet Treads, Step 5: Apply Adhesive

   Prepare the carpet adhesive by stirring it thoroughly. Use a small piece of scrap cardboard or a protective sheet to shield the wall and any already carpeted areas from excess adhesive. Using a specialized adhesive spreader (trowel) with appropriate notched teeth, apply a generous and even layer of carpet adhesive to the surface of the stair tread and riser you are currently working on. Ensure the entire area to be covered by carpet is coated with adhesive for optimal bonding. The notched trowel helps create ridges in the adhesive, which promotes stronger adhesion and proper curing.

5. 0:34–0:46 Apply Carpet Adhesive to Stairs From How to Put Carpet Treads on Already-Carpeted Stairs, Step 4: Apply Adhesive to Carpet Treads

   Prepare the carpet adhesive by stirring it thoroughly. Use a small piece of scrap cardboard or a protective sheet to shield the wall and any already carpeted areas from excess adhesive. Using a specialized adhesive spreader (trowel) with appropriate notched teeth, apply a generous and even layer of carpet adhesive to the surface of the stair tread and riser you are currently working on. Ensure the entire area to be covered by carpet is coated with adhesive for optimal bonding. The notched trowel helps create ridges in the adhesive, which promotes stronger adhesion and proper curing.

6. 1:19–1:59 Lay and Secure Carpet Sections (Repetitive) From How to Install Carpet Treads on a Spiral Staircase, Step 6: Secure Edges (if applicable)

   Starting from the bottom step, carefully position the pre-cut carpet section for the first riser onto the adhesive-coated surface, pressing it firmly. Then, lay the carpet section for the tread, ensuring it overhangs the front edge (nosing) slightly and aligns neatly with the riser carpet. Use a staple gun to secure the edges of the carpet, especially along the bottom of the risers, under the nosing, and where the tread meets the riser. A carpet tucker (also known as a stair tool) or a rubber mallet can be used to push the carpet firmly into the corners and along the edges, ensuring a tight fit and a crisp, clean seam. Continue this process for each step, working your way up the staircase.

7. 3:59–4:29 Final Trimming and Inspection From How to Install Carpet Stair Treads on Curved Stairs, Step 8: Inspect and Clean Up

   After all carpet sections have been laid and secured, perform a final inspection of the entire staircase. Use your utility knife to meticulously trim any remaining excess carpet, especially where the stairs meet the baseboards, walls, or the top landing. Ensure all carpet edges are perfectly flush and clean. Press down on all carpet surfaces to check for any loose spots or areas where the adhesive may not have fully bonded, and re-staple if necessary. The goal is a seamless, tight, and professional-looking carpet installation.

8. 3:59–4:29 Final Trimming and Inspection From How to Choose and Install Wool vs Synthetic Carpet Treads, Step 7: Trim Excess Material

   After all carpet sections have been laid and secured, perform a final inspection of the entire staircase. Use your utility knife to meticulously trim any remaining excess carpet, especially where the stairs meet the baseboards, walls, or the top landing. Ensure all carpet edges are perfectly flush and clean. Press down on all carpet surfaces to check for any loose spots or areas where the adhesive may not have fully bonded, and re-staple if necessary. The goal is a seamless, tight, and professional-looking carpet installation.

Guides that use this video

• How to Install Carpet Treads on a Spiral Staircase
• How to Install Carpet Stair Treads on Curved Stairs
• How to Install Carpet Treads on Concrete Basement Stairs
• How to Choose and Install Wool vs Synthetic Carpet Treads
• How to Put Carpet Treads on Already-Carpeted Stairs