Apply Anti-Slip Strip

What happens in this clip

Carefully peel back a section of the protective backing from one end of a pre-cut anti-slip strip. Align the exposed adhesive side of the strip along the edge of the stair, ensuring it is straight and centered. Slowly press the exposed part of the strip onto the stair, working from one end to the other, while gradually peeling off the rest of the backing. Once the entire strip is in place, firmly press down along its entire length with your hands to ensure good adhesion and to remove any trapped air bubbles.

Goal: Secure the anti-slip strip firmly to the stair edge

What's used

Tools

• Hands
• Squeegee

Materials

• Anti-slip staircase guard strip

About the full video

This project demonstrates the simple process of installing anti-slip "staircase guards" to prevent slips and falls on stairs. It involves preparing the stair surface, applying self-adhesive strips to the edge of each step, and trimming them to fit, significantly enhancing stair safety.

Step 3 of 5: Apply Anti-Slip Treads

Select either pre-fabricated anti-slip stair treads made of rubber, aluminum, or composite materials, or opt for an anti-slip coating system. If using pre-made treads, follow the manufacturer's instructions for cutting to size (if necessary) and adhering them to each step using a strong, weather-resistant adhesive. Ensure they are positioned evenly and securely. If using a coating, prepare the surface as directed by the product manufacturer, which may involve priming. Apply the coating evenly across the stair surface, often incorporating grit or aggregate for texture. Allow adequate drying time as specified by the product.

Open this step in the guide

Every video in How to Keep Outdoor Stairs Safe in Ice and Snow

1. Step 1: Inspect Existing Stairs

   • 0:00–0:15 Observe Existing Outdoor Stairs
   • 0:15–0:26 Evaluate Stair Safety
   • 0:00–0:17 Initial Visual Assessment of Step Construction

2. Step 2: Clean Stair Surfaces

   • 0:19–0:32 Clean Outdoor Wooden Surfaces
   • 1:12–1:14 Clean and Dry Steps
   • 1:13–1:37 Prepare the Surface

3. Step 3: Apply Anti-Slip Treads

   • 0:02–0:06 Apply Anti-Slip Strip (this video)
   • 0:51–4:06 Apply Adhesive-Backed Anti-Slip Products
   • 0:09–0:15 Understand Anti-Slip Product Options

4. Step 4: Install or Reinforce Railings

   • 0:24–0:42 Check Railing Height
   • 2:39–3:22 Check Railing Stability
   • 4:56–5:38 Attach Handrail

5. Step 5: Implement Snow and Ice Melting Solutions

   • 0:03–0:07 Apply De-Icing Salt to Surfaces
   • 0:07–0:20 Prepare Ice Melt and Traction Materials
   • 0:35–1:06 Ensure Snow and Ice Removal Readiness