Apply Spray Adhesive

What happens in this clip

Once the carpet is pulled back, take a can of spray adhesive and apply it evenly across the entire surface of the stair tread. This adhesive will help bond the carpet more securely to the step.

Goal: With the carpet pulled back, apply a generous and even layer of spray adhesive directly onto the exposed surface of the stair tread where the carpet will be re-secured. This provides additional grip and stability.

What's used

Tools

• SprayWise Spray Adhesive

About the full video

This project demonstrates how to quickly and effectively re-secure loose carpet on a stair tread using spray adhesive and a carpet tucking tool. The process involves lifting the carpet, applying adhesive, and then firmly re-attaching and tucking the carpet for a tight, safe finish.

Step 3 of 5: Apply Adhesive to Treads

Following the adhesive manufacturer's instructions, apply a generous and even layer of heavy-duty carpet adhesive or double-sided carpet tape to the back of each carpet tread. Ensure the adhesive covers the entire surface that will contact the metal stair, paying particular attention to the edges. Allow the adhesive to become tacky according to its drying time specifications before proceeding.

Open this step in the guide

Every video in How to Install Carpet Treads on Metal Spiral Stairs

1. Step 1: Clean Metal Spiral Stairs

   • 0:16–0:24 Clean and Prepare Staircase Substrate
   • 3:28–4:20 Rinse and Dry Stairs

2. Step 2: Measure and Cut Carpet Treads

   • 7:20–9:07 Measure and Cut Carpet
   • 6:25–8:58 Measure and Cut Carpet Sections
   • 0:12–0:57 Measure and Cut Carpet Tread

3. Step 3: Apply Adhesive to Treads

   • 1:16–2:09 Install Carpet Treads with Adhesive
   • 0:05–0:06 Apply Adhesive to Treads
   • 0:04–0:08 Apply Spray Adhesive (this video)

4. Step 4: Install Carpet Treads

   • 0:04–0:06 Install Carpet Treads
   • 1:16–2:09 Install Carpet Treads with Adhesive
   • 0:05–0:18 Install New Self-Adhesive Carpet Stair Treads

5. Step 5: Trim Edges and Secure

   • 0:43–1:28 Position and Secure Carpet Runner
   • 4:16–5:03 Tuck and Staple Carpet Edges
   • 22:17–35:01 Repeat for Remaining Treads and Final Checks