Clean and Prepare Staircase Substrate
From How to Install Carpet Treads on Metal Spiral Stairs · Step 1 of 5 · Video by Cameron & Sadie

Showing 0:16–0:24 of the source video. Watch the full video with every moment.
What happens in this clip
After the demolition is complete, thoroughly clean the entire staircase. Begin by sweeping all the dust, debris, and small pieces of material that remain on the stairs and surrounding areas. Follow this with a thorough vacuuming to pick up any fine particles. Finally, use an all-purpose cleaner and a rag or cloth to wipe down each stair tread and riser, ensuring a clean and smooth surface for the adhesive to bond properly.
Goal: Ensure the staircase is completely clean and ready for new flooring installation.
What's used
Tools
- Broom and Dustpan
- Rag or Cloth
- Vacuum Cleaner
Materials
- All-purpose cleaner Ever Spring
- Mild soap and water
About the full video
This project details the renovation of a carpeted staircase into a modern, plank-style staircase. It involves removing the old carpet and underlayment, meticulously cleaning the existing wooden structure, custom-cutting vinyl plank flooring for each tread and riser, and then adhering these pieces to create a durable and aesthetically pleasing new look.
Step 1 of 5: Clean Metal Spiral Stairs
Using a degreaser and a stiff brush, scrub down each step of the metal spiral staircase. Rinse thoroughly with water and allow the stairs to dry completely. For stubborn residue, a wire brush may be necessary. Ensure all surfaces are clean and free from any contaminants.
Every video in How to Install Carpet Treads on Metal Spiral Stairs
Step 1: Clean Metal Spiral Stairs
- 0:16–0:24 Clean and Prepare Staircase Substrate (this video)
- 3:28–4:20 Rinse and Dry Stairs
Step 2: Measure and Cut Carpet Treads
- 7:20–9:07 Measure and Cut Carpet
- 6:25–8:58 Measure and Cut Carpet Sections
- 0:12–0:57 Measure and Cut Carpet Tread
Step 3: Apply Adhesive to Treads
- 1:16–2:09 Install Carpet Treads with Adhesive
- 0:05–0:06 Apply Adhesive to Treads
- 0:04–0:08 Apply Spray Adhesive
Step 4: Install Carpet Treads
- 0:04–0:06 Install Carpet Treads
- 1:16–2:09 Install Carpet Treads with Adhesive
- 0:05–0:18 Install New Self-Adhesive Carpet Stair Treads
Step 5: Trim Edges and Secure
- 0:43–1:28 Position and Secure Carpet Runner
- 4:16–5:03 Tuck and Staple Carpet Edges
- 22:17–35:01 Repeat for Remaining Treads and Final Checks
How to Install Carpet Treads on Metal Spiral Stairs
A high-level outline for installing carpet treads on metal spiral stairs, focusing on preparation, fitting, and securing the treads for a safer and more comfortable stair surface.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

