Rinse and Dry Stairs

What happens in this clip

Using a garden hose with a spray nozzle, thoroughly rinse all the stairs, ensuring no cleaner residue or loose debris remains. Direct the water to wash away all the loosened dirt and cleaning solution. For faster drying, position a fan to circulate air over the stairs once rinsing is complete.

Goal: Remove all cleaner and debris, and dry the stairs

What's used

Tools

• Floor Fan (optional)
• Garden Hose with Spray Nozzle

About the full video

This video details the process of preparing and painting concrete stairs with durable exterior masonry paint. It covers cleaning with a drill brush and cleaner, making minor repairs, masking off areas, and applying two coats of paint for a long-lasting, protective finish.

Step 1 of 5: Clean Metal Spiral Stairs

Using a degreaser and a stiff brush, scrub down each step of the metal spiral staircase. Rinse thoroughly with water and allow the stairs to dry completely. For stubborn residue, a wire brush may be necessary. Ensure all surfaces are clean and free from any contaminants.

Open this step in the guide

Every video in How to Install Carpet Treads on Metal Spiral Stairs

1. Step 1: Clean Metal Spiral Stairs

   • 0:16–0:24 Clean and Prepare Staircase Substrate
   • 3:28–4:20 Rinse and Dry Stairs (this video)

2. Step 2: Measure and Cut Carpet Treads

   • 7:20–9:07 Measure and Cut Carpet
   • 6:25–8:58 Measure and Cut Carpet Sections
   • 0:12–0:57 Measure and Cut Carpet Tread

3. Step 3: Apply Adhesive to Treads

   • 1:16–2:09 Install Carpet Treads with Adhesive
   • 0:05–0:06 Apply Adhesive to Treads
   • 0:04–0:08 Apply Spray Adhesive

4. Step 4: Install Carpet Treads

   • 0:04–0:06 Install Carpet Treads
   • 1:16–2:09 Install Carpet Treads with Adhesive
   • 0:05–0:18 Install New Self-Adhesive Carpet Stair Treads

5. Step 5: Trim Edges and Secure

   • 0:43–1:28 Position and Secure Carpet Runner
   • 4:16–5:03 Tuck and Staple Carpet Edges
   • 22:17–35:01 Repeat for Remaining Treads and Final Checks