Install Oak Handrails and Metal Balusters
From How to Modernize a Dated Staircase with Rails, Lights and Treads · Step 4 of 6 · Video by Mindwave Creations

Showing 0:23–0:31 of the source video. Watch the full video with every moment.
What happens in this clip
With the newel posts in place, proceed to install the specially designed oak handrails and the black metal balusters. First, attach the oak handrails to the newel posts and along the stair stringer, ensuring they are level and securely fastened. Then, carefully insert each black metal baluster into the pre-drilled holes in the oak handrail and the shoe rail (the bottom rail that runs parallel to the handrail). The video shows the installer using a caulk gun to apply adhesive to secure the balusters firmly in place. This step requires significant precision and time to ensure proper spacing, alignment, and stability of each baluster, forming a robust and aesthetically pleasing railing system.
Goal: Precisely install new oak handrails and black metal balusters.
What's used
Tools
- Caulk Gun
- Level
- Measuring Tape
Materials
- Black Metal Balusters
- Glass panels
- Construction Adhesive
- Oak Handrails
- Metal handrails
About the full video
This DIY project details a complete staircase renovation, transforming an old, worn-out staircase into a modern and elegant feature. The process involves the demolition of existing railings, structural repairs to the stairs, removal of old carpet and installation of new, and finally, the precise installation of new newel posts, oak handrails, and metal balusters. The project concludes with the addition of decorative caps, showcasing a significant aesthetic and structural upgrade in a relatively short timeframe.
Step 4 of 6: Install New Balusters and Handrails
Begin by marking the spacing for your balusters according to local building codes (typically no more than 4 inches apart). Attach the balusters to the treads (or shoe or skirt board) and to the underside of the handrail. Use appropriate fasteners, such as baluster mounting kits or screws, ensuring they are strong and concealed if possible. Next, attach the handrail to the newel posts and to any supporting brackets. Ensure the handrail is at the correct height (typically 34-38 inches from the tread nosing) and is securely mounted to provide adequate support.
Every video in How to Modernize a Dated Staircase with Rails, Lights and Treads
Step 1: Remove Old Treads and Risers
- 1:39–2:35 Cut Tread Fasteners & Remove Old Treads
- 0:01–0:09 Remove Old Carpet and Treads
- 0:05–0:08 Remove Old Stair Components
Step 2: Inspect and Repair Staircase Structure
- 0:00–0:13 Assess Existing Stairs and Planning
- 0:09–0:14 Repair and Prepare Stair Structure
- 3:59–6:57 Replace Damaged Stair Treads or Risers
Step 3: Install New Treads and Risers
- 6:45–8:03 Install New Treads and Secure with Shims/Glue/Nails
- 9:53 Install New Treads
- 0:06–0:09 Install Treads and Risers
Step 4: Install New Balusters and Handrails
- 5:36–6:05 Install Balusters and Handrail
- 0:23–0:31 Install Oak Handrails and Metal Balusters (this video)
- 3:35–4:17 Install Balusters and Fillets
Step 5: Sand and Finish Treads and Handrails
- 0:20–0:25 Sand and Finish Treads
- 0:37–0:45 Sanding the Stairs for Smoothness
- 0:15–0:17 Sand the Stairs
Step 6: Install Stair Lighting (Optional)
- 0:01–0:04 Apply LED Strip Lights to Treads
- 7:31–9:55 Install LED Lighting and Treads
- 0:00–0:19 Install Flexible LED Strip Lighting
How to Modernize a Dated Staircase with Rails, Lights and Treads
This project involves updating a dated staircase by replacing or refinishing treads, modernizing the handrails and balusters, and potentially incorporating lighting elements for both aesthetics and safety. The goal is to create a more contemporary and inviting look for the staircase.
Read the full guide Browse all guides
Planning this project? Shop Oak Valley Designs.

