Peel and Adhere Strip

What happens in this clip

The abrasive strip has a wax paper backing that protects the adhesive. Locate a corner of the strip and carefully peel off this wax paper backing to expose the strong adhesive layer. Once the adhesive is exposed, carefully turn the strip over. Position the strip on the stair tread, aiming to keep it approximately 1 inch away from the front edge (the nosing) of the step. This placement is crucial because it aligns the strip with where foot traffic is most common. Once positioned correctly, press down firmly along the entire length of the strip to ensure it adheres securely to the stair surface.

Goal: Securely attach the anti-slip strip to the stair tread.

What's used

Tools

• Cut Abrasive Anti-Slip Strip Unspecified

About the full video

This project provides instructions on how to install abrasive anti-slip strips on exterior stairs to prevent slips and falls. It involves selecting the right type of strip, measuring and cutting it to size, peeling off the adhesive backing, and carefully applying it to the stair treads.

Step 3 of 5: Apply Adhesive

Depending on the type of edge strip material and the manufacturer's recommendation, apply a suitable adhesive. This could be a strong, double-sided tape specifically designed for flooring or stair treads, or a construction adhesive. If using tape, carefully peel off the backing and apply it evenly to the back of the strip. If using liquid adhesive, apply a thin, consistent bead along the edge of the tread where the strip will be placed.

Open this step in the guide

Every video in How to Add High-Contrast Edge Strips to Stairs for Low Vision

1. Step 1: Clean Stair Treads

   • 0:03–0:07 Prepare and Clean Stairs
   • 0:36–0:41 Clean and Smooth Stairs
   • 0:18–0:31 Clean the Stairs

2. Step 2: Measure and Cut Strips

   • 0:02 Measure and Cut Anti-Slip Strip
   • 0:13–0:20 Measure and Cut Strips
   • 0:55–1:05 Measure and Cut First Tread

3. Step 3: Apply Adhesive

   • 0:02–0:06 Apply Anti-Slip Strip
   • 0:20–0:45 Peel and Adhere Strip (this video)
   • 2:32–3:24 Prepare Treads with Adhesive

4. Step 4: Install Edge Strips

   • 0:20–0:45 Peel and Adhere Strip
   • 0:02–0:06 Apply Anti-Slip Strip
   • 0:10–0:13 Secure the First Tread

5. Step 5: Secure and Cure

   • 3:44–4:26 Final Curing and Caulking
   • 2:21–2:38 Complete Installation and Caulk Gaps
   • 3:06–3:19 Project Completion