Prepare Treads with Adhesive

What happens in this clip

Take one carpet tread and flip it over to expose the underside. Unroll the double-sided carpet tape (such as X-Fasten brand) and carefully apply two parallel strips along the long edges of the tread's underside. As you apply, peel off the protective backing from the tape. Use a utility knife (like a DeWalt brand) to cleanly cut the tape once each strip is fully applied.

Goal: Securely attach double-sided tape to the back of the carpet treads.

What's used

Tools

• Double-Sided Carpet Tape X-Fasten
• Utility Knife DeWalt
• Box cutter

Materials

• Carpet Treads Canyon

About the full video

This project provides a step-by-step guide on how to install carpet treads on hardwood stairs using double-sided carpet tape. The process involves preparing the treads, accurately positioning them, and securing them to enhance safety and aesthetics without requiring advanced tools or skills.

Step 3 of 5: Apply Adhesive

Depending on the type of edge strip material and the manufacturer's recommendation, apply a suitable adhesive. This could be a strong, double-sided tape specifically designed for flooring or stair treads, or a construction adhesive. If using tape, carefully peel off the backing and apply it evenly to the back of the strip. If using liquid adhesive, apply a thin, consistent bead along the edge of the tread where the strip will be placed.

Open this step in the guide

Every video in How to Add High-Contrast Edge Strips to Stairs for Low Vision

1. Step 1: Clean Stair Treads

   • 0:03–0:07 Prepare and Clean Stairs
   • 0:36–0:41 Clean and Smooth Stairs
   • 0:18–0:31 Clean the Stairs

2. Step 2: Measure and Cut Strips

   • 0:02 Measure and Cut Anti-Slip Strip
   • 0:13–0:20 Measure and Cut Strips
   • 0:55–1:05 Measure and Cut First Tread

3. Step 3: Apply Adhesive

   • 0:02–0:06 Apply Anti-Slip Strip
   • 0:20–0:45 Peel and Adhere Strip
   • 2:32–3:24 Prepare Treads with Adhesive (this video)

4. Step 4: Install Edge Strips

   • 0:20–0:45 Peel and Adhere Strip
   • 0:02–0:06 Apply Anti-Slip Strip
   • 0:10–0:13 Secure the First Tread

5. Step 5: Secure and Cure

   • 3:44–4:26 Final Curing and Caulking
   • 2:21–2:38 Complete Installation and Caulk Gaps
   • 3:06–3:19 Project Completion