Peel and Adhere Strip

What happens in this clip

The abrasive strip has a wax paper backing that protects the adhesive. Locate a corner of the strip and carefully peel off this wax paper backing to expose the strong adhesive layer. Once the adhesive is exposed, carefully turn the strip over. Position the strip on the stair tread, aiming to keep it approximately 1 inch away from the front edge (the nosing) of the step. This placement is crucial because it aligns the strip with where foot traffic is most common. Once positioned correctly, press down firmly along the entire length of the strip to ensure it adheres securely to the stair surface.

Goal: Securely attach the anti-slip strip to the stair tread.

What's used

Tools

• Cut Abrasive Anti-Slip Strip Unspecified

About the full video

This project provides instructions on how to install abrasive anti-slip strips on exterior stairs to prevent slips and falls. It involves selecting the right type of strip, measuring and cutting it to size, peeling off the adhesive backing, and carefully applying it to the stair treads.

Step 4 of 5: Install Edge Strips

Starting from one end of the stair tread, align the edge strip precisely with the edge. Press down firmly, working your way across the strip to ensure full contact with the adhesive. If using tape, peel off the backing as you go. Smooth out any bubbles or wrinkles. Ensure the strip is flush with the edges of the tread and does not overhang.

Open this step in the guide

Every video in How to Add High-Contrast Edge Strips to Stairs for Low Vision

1. Step 1: Clean Stair Treads

   • 0:03–0:07 Prepare and Clean Stairs
   • 0:36–0:41 Clean and Smooth Stairs
   • 0:18–0:31 Clean the Stairs

2. Step 2: Measure and Cut Strips

   • 0:02 Measure and Cut Anti-Slip Strip
   • 0:13–0:20 Measure and Cut Strips
   • 0:55–1:05 Measure and Cut First Tread

3. Step 3: Apply Adhesive

   • 0:02–0:06 Apply Anti-Slip Strip
   • 0:20–0:45 Peel and Adhere Strip
   • 2:32–3:24 Prepare Treads with Adhesive

4. Step 4: Install Edge Strips

   • 0:20–0:45 Peel and Adhere Strip (this video)
   • 0:02–0:06 Apply Anti-Slip Strip
   • 0:10–0:13 Secure the First Tread

5. Step 5: Secure and Cure

   • 3:44–4:26 Final Curing and Caulking
   • 2:21–2:38 Complete Installation and Caulk Gaps
   • 3:06–3:19 Project Completion