Position and Adhere Treads

What happens in this clip

Once the adhesive is exposed, the carpet stair tread is carefully positioned onto a stair. A tape measure is then used to quickly double-check the placement, likely for centering or consistent spacing from the edge. After confirming the position, the tread is pressed down firmly with hands to ensure secure adhesion and smoothed out to remove any air bubbles or wrinkles. This process is repeated for all stairs.

Goal: Securely attach stair treads to each step.

What's used

Tools

• Tape Measure
• Yardstick

Materials

• Oak Valley Designs Carpet Stair Tread Oak Valley Designs

Pro tips for this step

• Oak Valley Designs Pro Tip: Press from the center outwards to eliminate air bubbles and ensure a strong, lasting bond, especially at the corners and edges.

These safety tips are AI-generated and have not been verified by a professional. They may be incomplete or incorrect. Verify independently against manufacturer instructions and local codes, and consult a qualified professional before relying on them. This is not a substitute for professional advice.

Shop this step at Oak Valley Designs

• Bayside Charm - Tread

About the full video

This project demonstrates how to quickly and easily install self-adhesive carpet stair treads on outdoor stairs. The primary motivation is to provide a safer, less slippery surface for an aging dog, but it also enhances the aesthetic appeal of the stairs. The process involves simply peeling the backing and pressing the treads into place, requiring no power tools and minimal time.

Step 5 of 6: Secure the Bond: Press from Center Outward

Once your tread is perfectly placed, it's time to secure it firmly. Apply consistent pressure, starting right in the center of the tread and smoothly working your way outwards towards all the edges. This technique is essential for pushing out any trapped air bubbles, ensuring a beautifully smooth finish and a strong bond. After this initial press, go over the entire surface of the tread, paying extra attention to the corners and edges. This guarantees a secure bond that will prevent any part of the tread from curling or lifting. For an even more professional touch, a hand roller or a flat object can help seat the tread firmly, making sure every inch of our superior adhesive makes contact. This is how we ensure 'A better way to tread' for years to come!

Open this step in the guide

Every video in how to install carpet stair treads to make hardwood stairs safe for dogs

1. Step 1: Prepare Your Stairs: Clean & Dry for a Perfect Bond

   • 0:08–0:10 Prepare the Stair Surface
   • 0:34–0:40 Clean the Stairs
   • 0:04–0:07 Clean the Staircase

2. Step 2: Align with Precision: Mark Your Center

   • 0:40–0:53 Measure and Mark First Tread Placement
   • 0:05–0:10 Measure and Position the First Tread
   • 0:00–0:11 Measure and Align First Stair Tread

3. Step 3: Preview Your Perfect Placement: Dry-Run First!

   • 0:10–0:13 Place the First Stair Tread
   • 0:10–0:18 Place and Secure First Tread
   • 0:17–0:21 Position and Adhere Treads

4. Step 4: Begin Your Transformation: Peel & Place from the Top

   • 0:06–0:13 Apply Self-Adhesive Treads
   • 0:53–1:01 Install the First Stair Tread
   • 0:10–0:13 Place the First Stair Tread

5. Step 5: Secure the Bond: Press from Center Outward

   • 0:10–0:13 Secure the First Tread
   • 0:17–0:21 Position and Adhere Treads (this video)
   • 0:10–0:18 Place and Secure First Tread

6. Step 6: Complete Your Project & Enjoy Peace of Mind: Repeat and Test

   • 0:21–0:32 Final Review and Enjoyment
   • 0:13–0:17 Complete Installation and Final Inspection
   • 0:24–0:29 Review Finished Project