Prepare and Clean Stair Treads

What happens in this clip

Begin by thoroughly cleaning the stair treads. You can use a microfiber cloth or any suitable cloth, optionally combined with a handheld vacuum, to remove all dust and loose dirt. The goal is to ensure the entire stair surface is clean and completely dry. This is crucial for the adhesive on the back of the carpet treads to stick properly. Avoid using any cleaning products that might leave a greasy residue, such as Pledge or Pine-Sol, as this can compromise the adhesive bond.

Goal: Clean the entire surface of each stair tread to remove all dust and loose dirt, ensuring it is nice and dry for optimal adhesive bonding.

What's used

Tools

• Handheld vacuum
• Microfiber cloth

About the full video

This project provides step-by-step instructions for easily installing carpet treads onto stairs using strong adhesive tape. It covers preparing the stairs by cleaning them, marking alignment with painter's tape, and then securely attaching the self-adhesive carpet treads for a secure and streamlined look.

Step 4 of 8: Clean Stair Treads

Vacuum the stairs thoroughly to remove all loose dirt, dust, and debris. If the existing treads are dirty or have stains, clean them with an appropriate carpet cleaner or degreaser. Ensure the stairs are completely dry before proceeding to the next step. For wooden stairs, ensure any old finishes or residues are removed for better adhesion.

Open this step in the guide

Every video in How to Choose and Install Wool vs Synthetic Carpet Treads

1. Step 1: Choose Carpet Tread Material

   • 4:26–5:07 Understand Wool Rug Properties
   • 0:37–0:54 Overview of Rug Materials
   • 7:51–8:45 Choosing Rugs for Specific Rooms

2. Step 2: Measure Staircase Dimensions

   • 0:00–0:03 Measure Individual Stair Components
   • 0:57–1:16 Measure Treads and Mark Laminate
   • 0:18–0:49 Measure Stair Tread and Riser

3. Step 3: Purchase Carpet Treads

   • 0:02–0:04 Acquire and Prepare Carpet Treads

4. Step 4: Clean Stair Treads

   • 0:34–0:40 Clean the Stairs
   • 0:36–0:41 Clean and Smooth Stairs
   • 0:09–0:45 Prepare and Clean Stair Treads (this video)

5. Step 5: Apply Adhesive

   • 0:05–0:06 Apply Adhesive to Treads
   • 0:34–0:46 Apply Carpet Adhesive to Stairs
   • 0:59–2:07 Install First Stair Tread

6. Step 6: Install Carpet Treads

   • 0:04–0:06 Install Carpet Treads
   • 0:59–2:07 Install First Stair Tread
   • 1:16–2:09 Install Carpet Treads with Adhesive

7. Step 7: Trim Excess Material

   • 0:09–0:56 Trim Excess Carpet and Complete Installation
   • 0:16–0:25 Trim Excess Carpet Along Edge
   • 3:59–4:29 Final Trimming and Inspection

8. Step 8: Allow Adhesive to Cure

   • 27:37–29:21 Curing and Final Reveal
   • 3:44–4:26 Final Curing and Caulking
   • 2:21–2:38 Complete Installation and Caulk Gaps