DIY Guide: How to Apply Black Anti-Slip Tape to Stairs and Ramps

Moments in this video

1. 0:00–0:20 Clean and Prepare Stair Surface From How to Choose Between Carpet Treads, Grip Tape and Anti-Slip Coatings, Step 5: Prepare Surface for Selected Solution

   The video begins by highlighting the common issue of slippery tiled steps in homes and businesses, emphasizing the potential safety hazard. It then introduces 'Slip No More' anti-slip tape as an effective solution to increase safety. Before application, it is crucial to ensure that the stair steps are thoroughly clean and completely free of any oil, grease, or other contaminants. The video suggests using paint thinners or a similar cleaning product applied with a cloth to achieve a perfectly clean surface, which is vital for the tape's adhesive to bond effectively.

2. 0:20–0:25 Measure and Cut Anti-Slip Tape From How to Add Grip to Stair Nosings, Step 2: Prepare Anti-Slip Tape

   After the steps are clean and dry, the next step is to accurately measure and cut the anti-slip tape. The tape is unrolled and laid along the edge of the stair step where it will be applied to determine the precise length. Once the desired length is marked, scissors are used to cut a straight piece of tape from the roll. This ensures that the tape fits perfectly across the width of each step.

3. 0:20–0:25 Measure and Cut Anti-Slip Tape From How to Make Hardwood Stairs Safe for an Older Dog, Step 2: Measure and Cut Traction Strips

   After the steps are clean and dry, the next step is to accurately measure and cut the anti-slip tape. The tape is unrolled and laid along the edge of the stair step where it will be applied to determine the precise length. Once the desired length is marked, scissors are used to cut a straight piece of tape from the roll. This ensures that the tape fits perfectly across the width of each step.

4. 0:25–0:39 Position and Adhere Tape From How to Add Grip to Stair Nosings, Step 3: Apply Anti-Slip Tape

   With the anti-slip tape cut to the correct length, the application process begins. Start by peeling back a small section of the protective backing paper from one end of the tape, exposing the adhesive side. Carefully position this exposed section onto one side of the stair step, ensuring it is aligned straight. Gradually stick the tape down in sections, slowly peeling off more of the backing paper as you progress across the step. This method helps maintain a straight line and prevents air bubbles or creases from forming during application.

5. 0:39–0:52 Activate Adhesive with Roller From How to Add Grip to Stair Nosings, Step 3: Apply Anti-Slip Tape

   Once the anti-slip tape strip has been fully positioned and laid onto the stair step, a small paint roller is used to firmly press down along the entire length of the tape. This action is crucial as the pressure from the roller activates the adhesive, ensuring a strong and lasting bond between the tape and the stair surface. It's explicitly reminded that anti-slip tape should only be applied when the steps are completely dry, as moisture can significantly hinder adhesion.

Guides that use this video

• How to Choose Between Carpet Treads, Grip Tape and Anti-Slip Coatings
• How to Add Grip to Stair Nosings
• How to Make Hardwood Stairs Safe for an Older Dog