Clean and Prepare Stair Surface

What happens in this clip

The video begins by highlighting the common issue of slippery tiled steps in homes and businesses, emphasizing the potential safety hazard. It then introduces 'Slip No More' anti-slip tape as an effective solution to increase safety. Before application, it is crucial to ensure that the stair steps are thoroughly clean and completely free of any oil, grease, or other contaminants. The video suggests using paint thinners or a similar cleaning product applied with a cloth to achieve a perfectly clean surface, which is vital for the tape's adhesive to bond effectively.

Goal: Ensure the stair steps are clean and free of contaminants for optimal tape adhesion.

What's used

Tools

• Paint roller (small)
• Scissors

Materials

• Anti-Slip Tape (Slip No More brand)
• Cleaning cloth
• Cleaning product (e.g.
• paint thinner)

About the full video

This project provides a detailed guide on how to enhance the safety of slippery tiled steps by installing 'Slip No More' anti-slip tape. The process covers essential preparation steps, including cleaning the surface, accurate measurement and cutting of the tape, precise application, and final securing with a roller to ensure superior grip and durability.

Step 5 of 9: Prepare Surface for Selected Solution

Follow the manufacturer's instructions for the selected anti-slip product. For most applications, this involves thoroughly cleaning the surface to remove dirt, grease, and debris. If applying tape or treads, the surface must be completely dry. For coatings, you might need to degrease, acid etch (for concrete), or sand the surface to ensure proper adhesion. Priming may be necessary for certain materials or coatings. For example, if applying grip tape to a painted surface, ensure the paint is sound and clean; if the paint is peeling, it must be removed and the surface treated accordingly.

Open this step in the guide

Every video in How to Choose Between Carpet Treads, Grip Tape and Anti-Slip Coatings

1. Step 1: Assess Surface Type and Condition

   • 0:28–0:32 Prepare Surface for Adhesive Application
   • 0:51–4:06 Apply Adhesive-Backed Anti-Slip Products

2. Step 2: Determine Application Environment and Use

   • 0:09–0:15 Understand Anti-Slip Product Options
   • 0:03–0:16 Understand Anti-Slip Standards and Product
   • 0:28–0:32 Prepare Surface for Adhesive Application

3. Step 3: Compare Anti-Slip Solution Options

   • 0:09–0:15 Understand Anti-Slip Product Options
   • 1:47–1:57 Ensure Drainage and Durability
   • 0:46–0:59 Spray Clear Anti-Slip Coating

4. Step 4: Select Primary Anti-Slip Solution

   • 0:46–0:59 Spray Clear Anti-Slip Coating
   • 2:27–3:10 Apply Paint to Stairs
   • 0:09–0:15 Understand Anti-Slip Product Options

5. Step 5: Prepare Surface for Selected Solution

   • 0:00–0:20 Clean and Prepare Stair Surface (this video)
   • 0:28–0:32 Prepare Surface for Adhesive Application
   • 0:02 Prepare Stair Surface

6. Step 6: Install Carpet Treads (if selected)

   • 0:16–0:21 Apply Peel-and-Stick Carpet Treads
   • 1:16–2:09 Install Carpet Treads with Adhesive
   • 0:06–0:14 Install Carpet Treads

7. Step 7: Apply Grip Tape (if selected)

   • 3:46–6:05 Apply Grip Tape to the Deck
   • 2:18–5:35 Apply Grip Tape to the Deck (Dry Method)
   • 5:14–5:43 Apply Grip Tape

8. Step 8: Apply Anti-Slip Coating (if selected)

   • 0:33–0:39 Apply Tuff Grip Anti-Slip Coating
   • 0:18–0:45 Apply the Non-Skid Coating
   • 0:26–0:28 Apply Anti-Skid Paint

9. Step 9: Cure and Inspect

   • 1:07–1:26 Allow Curing & Access Product Information
   • 1:23–1:32 Allow Coating to Dry and Enjoy the Renewed Surface
   • 0:39–0:46 Allow Tuff Grip to Dry and Cure