Apply Grip Tape

What happens in this clip

Take the red grip tape, which typically has an adhesive backing. Peel off a portion of the backing to expose the adhesive. Carefully lay the grip tape onto the top surface of the longboard, aligning it as desired. Smooth it down, working from the center outwards to avoid air bubbles. Once the grip tape is in place, use a screwdriver to firmly press and score along the entire outside edge of the longboard. This creates a clean, defined line on the grip tape. Then, use a utility knife to carefully cut along the scored line, trimming away the excess grip tape. You can go back and trim any imperfections as needed for a clean finish.

Goal: Add a non-slip surface to the top of the longboard

What's used

Tools

• Screwdriver
• Utility Knife

Materials

• Red Grip Tape (adhesive-backed)

About the full video

This project provides detailed instructions on how to design, construct, and finish a custom multi-layer longboard using vacuum press laminating. It covers creating a foam mold with a CNC machine, gluing and pressing wood plies, shaping the board, applying custom graphics, and final assembly of the trucks and wheels. The process emphasizes achieving a formed shape for the board using a large-capacity vacuum bag.

Step 7 of 9: Apply Grip Tape (if selected)

Measure and cut the grip tape into the required sections using a sharp blade. Carefully peel the backing paper away from one end of the tape and align it with the starting edge of the surface. Smooth the tape down onto the surface using firm, even pressure, working from the center outwards to avoid air bubbles and wrinkles. Ensure all edges are pressed down securely to prevent peeling.

Open this step in the guide

Every video in How to Choose Between Carpet Treads, Grip Tape and Anti-Slip Coatings

1. Step 1: Assess Surface Type and Condition

   • 0:28–0:32 Prepare Surface for Adhesive Application
   • 0:51–4:06 Apply Adhesive-Backed Anti-Slip Products

2. Step 2: Determine Application Environment and Use

   • 0:09–0:15 Understand Anti-Slip Product Options
   • 0:03–0:16 Understand Anti-Slip Standards and Product
   • 0:28–0:32 Prepare Surface for Adhesive Application

3. Step 3: Compare Anti-Slip Solution Options

   • 0:09–0:15 Understand Anti-Slip Product Options
   • 1:47–1:57 Ensure Drainage and Durability
   • 0:46–0:59 Spray Clear Anti-Slip Coating

4. Step 4: Select Primary Anti-Slip Solution

   • 0:46–0:59 Spray Clear Anti-Slip Coating
   • 2:27–3:10 Apply Paint to Stairs
   • 0:09–0:15 Understand Anti-Slip Product Options

5. Step 5: Prepare Surface for Selected Solution

   • 0:00–0:20 Clean and Prepare Stair Surface
   • 0:28–0:32 Prepare Surface for Adhesive Application
   • 0:02 Prepare Stair Surface

6. Step 6: Install Carpet Treads (if selected)

   • 0:16–0:21 Apply Peel-and-Stick Carpet Treads
   • 1:16–2:09 Install Carpet Treads with Adhesive
   • 0:06–0:14 Install Carpet Treads

7. Step 7: Apply Grip Tape (if selected)

   • 3:46–6:05 Apply Grip Tape to the Deck
   • 2:18–5:35 Apply Grip Tape to the Deck (Dry Method)
   • 5:14–5:43 Apply Grip Tape (this video)

8. Step 8: Apply Anti-Slip Coating (if selected)

   • 0:33–0:39 Apply Tuff Grip Anti-Slip Coating
   • 0:18–0:45 Apply the Non-Skid Coating
   • 0:26–0:28 Apply Anti-Skid Paint

9. Step 9: Cure and Inspect

   • 1:07–1:26 Allow Curing & Access Product Information
   • 1:23–1:32 Allow Coating to Dry and Enjoy the Renewed Surface
   • 0:39–0:46 Allow Tuff Grip to Dry and Cure