Apply Paint to Stairs

What happens in this clip

Starting from the top step and working your way down, use a paintbrush to apply an even coat of the anti-slip paint mixture to the concrete treads. Ensure that each step is fully covered. The texture from the sand should be visible and palpable. Apply consistently, mixing the paint frequently in your tray to redistribute the sand, ensuring a uniform finish across all steps.

Goal: Apply the anti-slip paint evenly to the concrete staircase.

What's used

Tools

• Paintbrush

Materials

• Anti-Slip Paint Mixture Davies Acreex (custom mix)

About the full video

This project guides you through creating and applying your own anti-slip paint for concrete surfaces, specifically a slippery staircase. By mixing fine-grained sand with rubberized floor coating, you can significantly increase traction and prevent falls. The process involves cleaning the surface, sifting sand, mixing it with paint in small batches, and applying it evenly to achieve a durable, non-slip finish.

Step 4 of 9: Select Primary Anti-Slip Solution

Based on the information gathered in steps 1-3, make a final decision on which type of anti-slip solution to use. For example, if you have a smooth, indoor wooden staircase that gets moderate foot traffic, carpet treads might be a good choice. If you have a rough, outdoor concrete patio exposed to weather, a durable coating might be more appropriate. For a slippery metal ramp, heavy-duty grip tape could be suitable.

Open this step in the guide

Every video in How to Choose Between Carpet Treads, Grip Tape and Anti-Slip Coatings

1. Step 1: Assess Surface Type and Condition

   • 0:28–0:32 Prepare Surface for Adhesive Application
   • 0:51–4:06 Apply Adhesive-Backed Anti-Slip Products

2. Step 2: Determine Application Environment and Use

   • 0:09–0:15 Understand Anti-Slip Product Options
   • 0:03–0:16 Understand Anti-Slip Standards and Product
   • 0:28–0:32 Prepare Surface for Adhesive Application

3. Step 3: Compare Anti-Slip Solution Options

   • 0:09–0:15 Understand Anti-Slip Product Options
   • 1:47–1:57 Ensure Drainage and Durability
   • 0:46–0:59 Spray Clear Anti-Slip Coating

4. Step 4: Select Primary Anti-Slip Solution

   • 0:46–0:59 Spray Clear Anti-Slip Coating
   • 2:27–3:10 Apply Paint to Stairs (this video)
   • 0:09–0:15 Understand Anti-Slip Product Options

5. Step 5: Prepare Surface for Selected Solution

   • 0:00–0:20 Clean and Prepare Stair Surface
   • 0:28–0:32 Prepare Surface for Adhesive Application
   • 0:02 Prepare Stair Surface

6. Step 6: Install Carpet Treads (if selected)

   • 0:16–0:21 Apply Peel-and-Stick Carpet Treads
   • 1:16–2:09 Install Carpet Treads with Adhesive
   • 0:06–0:14 Install Carpet Treads

7. Step 7: Apply Grip Tape (if selected)

   • 3:46–6:05 Apply Grip Tape to the Deck
   • 2:18–5:35 Apply Grip Tape to the Deck (Dry Method)
   • 5:14–5:43 Apply Grip Tape

8. Step 8: Apply Anti-Slip Coating (if selected)

   • 0:33–0:39 Apply Tuff Grip Anti-Slip Coating
   • 0:18–0:45 Apply the Non-Skid Coating
   • 0:26–0:28 Apply Anti-Skid Paint

9. Step 9: Cure and Inspect

   • 1:07–1:26 Allow Curing & Access Product Information
   • 1:23–1:32 Allow Coating to Dry and Enjoy the Renewed Surface
   • 0:39–0:46 Allow Tuff Grip to Dry and Cure