How to Install Stair Treads & Risers: Pro Techniques
Video by Insider Carpentry - Spencer Lewis · 1 moment used in Oak Valley Designs's DIY guides · 26:04 long
Moments in this video
- 19:07–19:52 Dry-Fit and Test Treads
From How to Install Treads on Stairs with a Mid-Stair Landing, Step 5: Test Fit New Treads
Before permanently installing the treads, dry-fit them into place. Gently slide each tread under the previously installed riser. Check that the tread fits snugly against the skirt board on both sides and that it is tight against the riser. A good fit means minimal gaps on the sides and a flush connection with the riser. If a tread is too tight, it may need slight sanding or trimming. If it's too loose, you might need to adjust or recut. After confirming a good dry fit, carefully remove the treads, ensuring not to damage the risers.
The guide that use this video
More from the Oak Valley Designs DIY Hub
Read the guide Browse all guides
Planning this project? Shop Oak Valley Designs.
Subscribe for exclusive updates
Be the first to know about promotions, new products, and sales.