HOW TO MEASURE YOUR STAIRS AND LANDING FOR CARPET - UK #carpet #stairs #flooring #homeimprovement

Moments in this video

1. 1:04–2:19 Measure Top Landing Dimensions From How to Measure for a Landing Rug or Landing Pad, Step 2: Measure the landing depth

   First, measure the overall width of the top landing. Extend the tape measure from one wall to the furthest point on the opposite side, including any baseboards or door frames. In this case, the width is 6 feet 6 inches. Next, measure the length of the top landing. From the edge of the first step, extend the tape measure to the furthest point, which may be a doorway or wall. In this video, the length is 6 feet. Record these measurements as 'Top Landing' (TL) along with the pile direction (e.g., 6'6" x 6' ↓). Always add extra material (e.g., 6 inches) to your exact measurements for cutting and tucking purposes.

2. 1:04–2:19 Measure Top Landing Dimensions From How to Measure for a Landing Rug or Landing Pad, Step 3: Note any obstructions or irregular shapes

   First, measure the overall width of the top landing. Extend the tape measure from one wall to the furthest point on the opposite side, including any baseboards or door frames. In this case, the width is 6 feet 6 inches. Next, measure the length of the top landing. From the edge of the first step, extend the tape measure to the furthest point, which may be a doorway or wall. In this video, the length is 6 feet. Record these measurements as 'Top Landing' (TL) along with the pile direction (e.g., 6'6" x 6' ↓). Always add extra material (e.g., 6 inches) to your exact measurements for cutting and tucking purposes.

3. 2:54–4:47 Measure Straight Stairs From How to Find the Angle of Your Stairs, Step 2: Measure the total run of the staircase

   To measure straight stairs, measure from the nose (front edge) of one step, down the riser, and across the tread to the nose of the next step. Repeat this for all straight steps. For beginners, it's advised to measure each step individually and sum them up for total length. A common mistake is just measuring along the top of the treads, which will result in insufficient material. The combined measurement for each step is crucial. For carpet installation, always add at least 6 inches to your total length measurement to allow for proper tucking and trimming.

4. 7:25–8:46 Measure Winder Steps Width From How to Measure Outdoor Stairs for Treads, Step 3: Measure Tread Width

   After measuring the depth, measure the width of each winder step. This is typically the widest part of the step. Place the tape measure at the furthest corner on one side and extend it to the furthest corner on the opposite side. Do not measure only the narrowest front edge, as this will lead to insufficient material. Always measure the furthest points of the step's width. Add extra material (e.g., 6 inches) to these width measurements as well.

5. 8:46–9:51 Measure Half Landing (Sub-Landing) From How to Measure for a Landing Rug or Landing Pad, Step 2: Measure the landing depth

   If your staircase includes a half-landing or sub-landing (a small square platform between sets of stairs), measure its length and width. Treat this as a separate rectangular piece. As with all other measurements, round up and add extra material for cutting and tucking. Record these measurements, indicating the pile direction with an arrow.

Guides that use this video

• How to Measure for a Landing Rug or Landing Pad
• How to Find the Angle of Your Stairs
• How to Measure Outdoor Stairs for Treads