← Guide
Recessed Staircase Lighting
Step 3 of 8
Clip 1/3
Helpful?
Step 3 · Install Wiring
Drill holes through wall studs or ceiling joists as needed to route the electrical cable. Use a fish tape or similar tool to pull the wire through. Ensure the wire is secured properly and does not come into contact with sharp edges. Leave enough slack at each fixture location for making connections. The wire type and gauge must be appropriate for the circuit's amperage and the fixture's requirements, typically 14/2 or 12/2 NM-B cable for residential lighting.
Tools and Materials
Drill
DIABLO 1/2 in. x 7-1/2 in. Auger Bit for Wood and Nail-Embedded Wood (1-Piece)
Klein Tools 100 ft. Non-Conductive Fiberglass Fish Tape (56371) 56371
Klein Tools Loose Cable Stapler 450-100
Ancor 100 ft. Coaxial Cable, White 150510
Subscribe for exclusive updates
Be the first to know about promotions, new products, and sales.